Search for dissertations about: "Process engineering"
Showing result 1 - 5 of 6548 swedish dissertations containing the words Process engineering.
-
1. Chemistry and Process Design of Integrated Removal of Nitrogen and Sulfur oxides in Pressurized Flue Gas Systems
Abstract : Carbon capture and storage is vital to reach the climate goals to limit the increase in the global temperature. Among the carbon capture technologies, oxy-fuel and chemical looping combustion produce a stream mainly containing carbon dioxide (CO2) and water but also contaminants such as nitrogen oxides (NOx) and sulfur oxides (SOx). READ MORE
-
2. Fundamentals of NH3-SCR and SOx chemistry over copper zeolite for the control of NOx and greenhouse gas (N2O) emissions
Abstract : The release of N2O over Cu-zeolite was investigated due to the critical contribution it makes to the atmosphere as one of the greenhouse gases (GHGs). An exhaust after-treatment system (EATS) for heavy-duty vehicles that uses Cu/SSZ-13 as the selective catalyst reduction (SCR) catalyst experiences not only a variety of flow, temperature and chemical conditions but is also exposed to various resulting contaminants. READ MORE
-
3. Bio-SNG from Thermal Gasification - Process Synthesis, Integration and Performance
Abstract : Biomethane or synthetic natural gas (Bio-SNG) produced from gasified renewable woody biomass is a promising option for replacing fossil natural gas. The complete interchangeability with natural gas in all its conventional applications such as in the power generation, transportation and chemical industry sector is of particular interest. READ MORE
-
4. Fine particle emissions and slag formation in fixed-bed biomass combustion : aspects of fuel engineering
Abstract : There is a consensus worldwide that the share of renewable energy sources should be increased to mitigate climate change. The strive to increase the renewable energy fraction can partly be met by an increased utilization of different biomass feedstocks. READ MORE
-
5. Mechanism of the passive NOx adsorption process on zeolite-supported Pd in controlling cold-start emissions
Abstract : Passive NOx adsorbers (PNA) have been used for preventing NOx emissions being released during a cold start. This method involves trapping NOx on an adsorbent at low temperatures and releasing them later, when the exhaust temperature exceeds 200℃. READ MORE