Search for dissertations about: "Retained austenite"

Showing result 1 - 5 of 21 swedish dissertations containing the words Retained austenite.

  2. 1. Microstructure and mechanical properties of a 5 wt.% Cr cold work tool steel : Influence of heat treatment procedure

    Author : Arbab Rehan; Lars-Erik Svensson; Leif Karlsson; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cold work tool steel; Heat treatment; Microstructural characterisation; Mechanical properties; Retained austenite; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Abstract : The demand for Advanced High Strength Steel (AHSS) in the automotive industry is increasing day by day. It is mainly motivated by the fact that AHSS can be used as thin sheets while having high strengths. READ MORE

  4. 2. On the role of microstructure in wear of nanostructured carbide-free bainitic steels

    Author : Pouria Valizadeh Moghaddam; Jens Hardell; Esa Vuorinen; Braham Prakash; Mikael Olsson; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tribology; Wear; Microstructure; Carbide-free bainite; Nanostructured; Retained austenite; Steel; High temperature; Machine Elements; Maskinelement;

    Abstract : The significance of steel production for the development of sustainable society and economy is immense. Today’s fast growing global economy poses an increasing demand for improving the properties of steel. READ MORE

  5. 3. Characterization of White Layers induced by Hard Turning of AISI 52100 Steel

    Author : Seyed Hosseini; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; white layer; hard turning; IR-pyrometer; nano-sized grains; martensite; cutting temperature; bainite; cubic boron nitride; residual stress; retained austenite; cutting forces;

    Abstract : Hard turning is a machining process applied to metallic materials with hardness above 45 HRC. The process offers high production flexibility and sustainable manufacturing since it allows performing both rough and finishing machining of complex geometries in one single setup. READ MORE

  6. 4. White Layer Formation during Hard Turning of Through-Hardened Martensitic and Bainitic AISI 52100 Steel

    Author : Seyed Hosseini; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; white layers; residual stresses; phase transformation; dynamic recovery; bainite; dynamic recrystallization; carbide deformation; retained austenite; steel; martensite;

    Abstract : Increased demands for flexible manufacturing lines, shorter cycle times and reduced impact on the environment drives the need for optimization of today’s manufacturing. For machining of hardened steel parts (>45 HRC), grinding has been the obvious choice for many decades. However, hard turning has often been considered as a replacement due to e. READ MORE

  7. 5. Effect of heat treatment on microstructure and mechanical properties of a 5 wt.% Cr cold work tool steel

    Author : Arbab Rehan; Lars-Erik Svensson; Leif Karlsson; Anna Medvedeva; Per Erik Skogholm; Berne Högman; Reinhold Schneider; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cold work tool steel; Hardening; Tempering; Microstructural characterisation; Retained austenite; Martensite; Bainite; Hardness; Impact toughness; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Abstract : This work presents investigations related to phase transformations occurring inthe 5 wt.% Cr cold work tool steel Caldie during hardening and tempering treatments. READ MORE