Search for dissertations about: "Secondary energy"

Showing result 16 - 20 of 414 swedish dissertations containing the words Secondary energy.

  1. 16. Laminar-flow Liquid-to-air Heat Exchangers - Energy-efficient Display Cabinet Applications

    Author : Caroline Haglund Stignor; Värmeöverföring; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; energy-efficiency; indirect cooling; display cabinet; pressure drop; heat transfer; flat-tube heat exchanger; cooling coil; laminar;

    Abstract : Provisions are stored and displayed in supermarkets and grocery stores, at a temperature lower than the ambient, in display cabinets, which are responsible for a significant amount of the energy use in this sector. During the 1990s, major changes in the regulations governing the use of synthetic refrigerants took place in Sweden. READ MORE

  2. 17. Wood Fuel Pellets: Sawdust Drying in the Energy System

    Author : Magnus Ståhl; Karlstads universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wood fuel pellets; sawdust; drying; pellet production; recirculation; VOC; system integration; Miljö- och energisystem; Environmental and Energy Systems;

    Abstract : In 2004, the amount of wood fuel pellets used in Sweden was 1 256 000 tons, it was mostly used in large scale burning for district heating. Over the last 10 years, a significant increase in pellet production has occurred and today the preferred raw materials for pellet production, i.e., dry sawdust and wood shavings, are insufficient. READ MORE

  3. 18. Numerical and Experimental Investigations of Design Parameters Defining Gas Turbine Nozzle Guide Vane Endwall Heat Transfer

    Author : Frank G. Rubensdörffer; Torsten Fransson; Albin Bölcs; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Turbomachinery; secondary flow; endwall heat transfer; linear cascade test facility; CFD; RANS; V2F turbulence model; combustion chamber nozzle guide vane interface; heat shield; cavity; cooling air; Mechanical energy engineering; Mekanisk energiteknik;

    Abstract : The primary requirements for a modern industrial gas turbine consist of a continuous trend of an increasing efficiency combined with very low emissions in a robust, cost-effective manner. To fulfil these tasks a high turbine inlet temperature together with advanced dry low NOX combustion chambers are employed. READ MORE

  4. 19. On the Analysis of Energy Efficient Aircraft Engines

    Author : Oskar Thulin; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Performance modelling; Aero engine; Turbofan; Aircraft engine; Installed propulsion; Ultra high bypass ratio; Exergy analysis; Engine weight estimate; Variable area fan nozzle; Multiple pivoting flaps; Translating cowls;

    Abstract : Aero engine performance analysis is highly multidimensional using various measures of component performance such as turbomachinery and mechanical efficiencies, and pressure loss coefficients. Using conventional performance analysis, relying on only the laws of thermodynamics, it is possible to understand how the performance parameters affect the component performance, but it is difficult to directly compare the magnitude of various loss sources. READ MORE

  5. 20. Enhanced biogas production from municipal WWTPs : Co-digestion of microalgae with sewage sludge and thermophilic secondary digestion of mesophilic digested sludge

    Author : Jesper Olsson; Eva Thorin; Emma Nehrenheim; Raúl Muñoz Torre; Mälardalens högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Energy- and Environmental Engineering; energi- och miljöteknik;

    Abstract : Biogas is produced when organic material is broken down in oxygen-free (anaerobic) conditions. This process is called anaerobic digestion and is used in most large and medium-sized municipal wastewater treatment plants in Sweden. READ MORE