Search for dissertations about: "Short- Circuit Currents"
Showing result 1 - 5 of 25 swedish dissertations containing the words Short- Circuit Currents.
-
1. Aspects on Wind Turbine Protections and Induction Machine Fault Current Prediction
Abstract : This thesis presents detailed modelling of the induction machine with the main objective being accurate fault current prediction. The thesis focus mainly on mains connected induction machines and the response due to severe disturbances in the supply voltage, such as three-phase short-circuit faults. READ MORE
-
2. On Reliability of SiC Power Devices in Power Electronics
Abstract : Silicon Carbide (SiC) is a wide-bandgap (WBG) semiconductor materialwhich has several advantages such as higher maximum electric field, lowerON-state resistance, higher switching speeds, and higher maximum allowablejunction operation temperature compared to Silicon (Si). In the 1.2 kV - 1. READ MORE
-
3. Fault Behavior of Wind Turbines
Abstract : Synchronous generators have always been the dominant generation type in the grid. This fact affected both planning and operation of power systems. With the fast increase of wind power share in the grid in the last decade, the situation is changing. In some countries wind power represents already a consistent amount of the total generation. READ MORE
-
4. Measurement and modelling of unbalanced magnetic pull in hydropower generators
Abstract : Hydropower research is often perceived to be an old and exhausted field of study but with ageing equipment and the need for more intermittent operation caused by an increased share of other renewable energy sources new challenges lie ahead.The main focus of this dissertation are the electromagnetic forces resulting from nonuniform air gap flux, whether it be caused by rotor eccentricity or a faulty field winding. READ MORE
-
5. Electrical Characterisations of Bearings
Abstract : Mechanical bearings are an integral part of industry, and are used in various places in order to reduce friction between two interacting surfaces and are used to transmit power and loads. Mechanical bearings are one of the most extensively used components within the wind industry, but on the other hand they are also one of the most dominantly failing failed components. READ MORE