Search for dissertations about: "Shroud contact"
Found 5 swedish dissertations containing the words Shroud contact.
-
1. On efficient and adaptive modelling of friction damping in bladed disks
Abstract : This work focuses on efficient modelling and adaptive control of friction damping in bladed disks. To efficiently simulate the friction contact, a full-3D time-discrete contact model is reformulated and an analytical expression for the Jacobian matrix is derived that reduces the computation time drastically with respect to the classical finite difference method. READ MORE
-
2. Numerical modelling and analysis of friction contact for turbine blades
Abstract : High cycle fatigue failure of turbine and compressor blades due to resonance in the operating frequency range is one of the main problems in the design of gas turbine engines. To suppress excessive vibrations in the blades and prevent high cycle fatigue, dry friction dampers are used by the engine manufacturers. READ MORE
-
3. Formation of non-metallic inclusions and the possibility of their removal during ingot casting
Abstract : The present study was carried out to investigate the formation and evolution of non-metallic inclusions during ingot casting. Emphasize have been on understanding the types of inclusions formed and developed through the casting process and on the development of already existing inclusions carried over from the ladle during casting. READ MORE
-
4. Simulation and Optimization of an Axial Compressor Considering Tip Clearance Flow
Abstract : With ever-increasing demands for high efficiency in axial compressors, it has become important to consider more geometrical features of the manufactured component in the design phase. Many possibilities open if the level of fidelity of the computational model can be increased. READ MORE
-
5. An experimental and numerical study of an automotive cooling module
Abstract : Heavy vehicles are major emitters of noise. Especially at idle or low vehicle speeds a large portion of the noise emanates from the fan that forces the flow through the cooling module. The aim of this work is to investigate and reveal aerodynamic and acoustic installation effects linked to the cooling package. READ MORE