Search for dissertations about: "Solar heater"
Showing result 1 - 5 of 7 swedish dissertations containing the words Solar heater.
-
1. Combined solar and pellet heating systems : Study of energy use and CO-emissions
Abstract : In this study 4 solar and pellet heating systems have been studied with the help of annual dynamic simulations. Two of the systems comprised a pellet stove and two systems were solar combisystems; one with a store integrated pellet burner, the other with a separate pellet boiler. READ MORE
-
2. Combined solar and pellet heating systems : Studies of energy use and CO-emissions
Abstract : In this study 4 solar and pellet heating systems have been studied with the help of annual dynamic simulations. Two of the systems comprised a pellet stove and two systems were solar combisystems; one with a store integrated pellet burner, the other with a separate pellet boiler. READ MORE
-
3. Retrofitted Solar Domestic Hot Water System for Single-Family Electrically-Heated Houses: Development and testing
Abstract : In Sweden, there are roughly half a million single family houses that use electric heating for both domestic hot water production and space heating. Since electricity is the most expensive energy source in Sweden, it is interesting to install a high solar fraction solar thermal system to reduce the energy use in these houses. READ MORE
-
4. On Premixed Gas Fuelled Stirling Engine Combustors with Combustion Gas Recirculation
Abstract : The main objective in the research described in this thesis was to design and test the use of lean premixed combustion using combustion gas recirculation for gas fuelled Stirling engine combustors. A system using a flame-arrester type of flame-holder to stabilize the flame and an ejector system for the recirculation of combustion gas was designed and tested in the laboratory. READ MORE
-
5. Thermal Radiation from Co-evaporated Cu(In,Ga)Se2 : End point detection and process control
Abstract : The use of solar cells for energy production has indeed a bright future. Reduction of cost for fabrication along with increased efficiency are key features for a market boom, both achieved as a result of increased knowledge of the technology. READ MORE