Search for dissertations about: "Solidification"
Showing result 11 - 15 of 167 swedish dissertations containing the word Solidification.
-
11. Study of solidification and volume change in lamellar cast iron with respect to defect formation mechanisms
Abstract : Lamellar cast iron is a very important technical alloy and the most used material in the casting production, and especially in the automotive industry which is the major consumer. Beside the many great properties, it is inclined to form casting defects of which some can be prevented, and some may be repaired subsequently. READ MORE
-
12. Rapid solidification behaviour of Fe and Al based alloys
Abstract : Rapid solidification experiment on Fe-Cr-Mo-Mn-Si-C alloy was performed to investigate metastable phases formed during the solidification. A wide range of cooling rate was used to analyse the sample from melt spinning technique (~107 K/s) to water quenching method (~102 K/s). READ MORE
-
13. Factors Influencing the Formation of Shrinkage Porosity in Grey Cast Iron
Abstract : The presence of shrinkage defects is of major concern in the production of grey iron castings. This type of defect can penetrate through the casting as a three-dimensional network. READ MORE
-
14. Phase-field modeling of diffusion controlled phase transformations
Abstract : Diffusion controlled phase transformations are studied bymeans of the phase-field method. Morphological evolution ofdendrites, grains and Widmanst\"atten plates is modeled andsimulated.Growth of dendrites into highly supersaturated liquids ismodeled for binary alloy solidification. READ MORE
-
15. Morphological characterization of primary austenite in cast iron
Abstract : Automotive industry products portfolio includes a wide variety of complex‐shaped cast iron products, such as truck engine components, that need to withstand a constant trend of higher demands, especially urged by stricter environmental regulations on emissions. Combined with this continued demand on properties improvement, cast iron industry faces a process problem related to the lack of understanding of solidification and mechanisms behind defect formation. READ MORE