Search for dissertations about: "Spinel oxide"

Showing result 1 - 5 of 44 swedish dissertations containing the words Spinel oxide.

  1. 1. Key Aspects of Sintering Powder Metallurgy Steel Prealloyed with Chromium and Manganese

    Author : Ola Bergman; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Manganese; Prealloyed; Sintering; Mechanical properties; Chromium; Spinel oxide; Powder metallurgy; PM steel; Oxide reduction; Residual oxides; Atmosphere;

    Abstract : The powder metallurgy (PM) process is a cost efficient near net-shape technology suitable for sustainable manufacturing of structural steel components. A drawback with the PM technology is the difficulty to use oxidation sensitive alloying elements, such as Cr and Mn. READ MORE

  2. 2. Surface Characteristics of Water Atomized Pre-alloyed Steel Powders and their effect on Sintering

    Author : Dimitris Chasoglou; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; spinel oxides; sintering; Cr-pre-alloyed powder; reduction; sintering atmosphere; surface oxide; fractography; XPS; oxidation; AES; EDX; carbothermal reaction; SEM; Powder metallurgy;

    Abstract : Powder Metallurgy (PM) is an efficient method, in terms of cost and raw material utilization, for the production of structural parts that have strict dimensional tolerances and complex geometries. In the common processing route, steel powder is fabricated by water atomization and then pressed and sintered into the final component. READ MORE

  3. 3. Failure of thermal barrier coatings under thermal and mechanical fatigue loading : microstructural observations and modelling aspects

    Author : Håkan Brodin; Anette M. Karlsson; Linköpings universitet; []
    Keywords : thermal barrier coating; TBC; delamination; crack initiation; crack propagation; crack growth; oxidation; alumina; spinel; MCrAIY; diffusion; fatigue; modelling; modeling; degradation; TECHNOLOGY; TEKNIKVETENSKAP;

    Abstract : Industrial and air-borne gas turbine hot components suffer from creep, oxidation, corrosion and microstructural degradation if not shielded from the hot and aggressive combustion gases. Two major strategies commercially available are adopted; film cooling by pressurised air and application of protective coatings. READ MORE

  4. 4. Some aspects of non-metallic inclusions during vacuum degassing in ladle treatment : with emphasize on liquid CaO-Al2O3 inclusions

    Author : Young Jo Kang; Du Sichen; Takahiro Miki; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; non-metallic inclusions; ladle refining; vacuum degassing; ladle glaze; spinel; SiO2 activity; agglomeration; cold model; open-eye; inclusion removal; Metallurgical process engineering; Metallurgisk processteknik;

    Abstract : The present thesis was to study non-metallic inclusions during vacuum degassing in ladle treatment. Emphasize was mostly given to liquid CaO-Al2O3 inclusions. A series of industrial experiments were carried out at Uddeholm Tooling AB, Hagfors, Sweden. To gain an insight into the industrial findings, laboratory investigations were also performed. READ MORE

  5. 5. A Study on Vanadium Extraction from Fe-V-P Melts Derived from Primary and Secondary Sources

    Author : Mikael Lindvall; Du Sichen; Christiaan Pistorius; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vanadium; V; V2O5; V2O3; ferrovanadium; vanadiferous; titaniferous; titanomagnetites; magnetite; spinel; slag; experimental; free; spinel; converter; LD; BOF; solubility; equilibrium; selective; oxidation; hibonite; karelianite; Al2O3; CaO; SiO2; Teknisk materialvetenskap; Materials Science and Engineering;

    Abstract : Vanadium extraction methods were developed for iron-vanadium-phosphorus (Fe-V-P) melts derived from processing of V-bearing titanomagnetites and steel slags. Studies on phase relationships of V slags were carried out to provide important understanding of the extraction processes. READ MORE