Search for dissertations about: "Stålbyggnad"

Showing result 21 - 25 of 119 swedish dissertations containing the word Stålbyggnad.

  1. 21. Plate buckling resistance : patch loading of longitudinally stiffened webs and local buckling

    Author : Mattias Clarin; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Abstract : Incremental launching of steel bridges is a demanding undertaking, on the erection site as well as on the designers desk. Not seldom, the structure itself is during the launching subjected to high concentrated forces on the lower flange when passing over the launching shoe or a intermediate support (e.g. column). READ MORE

  2. 22. Shear walls with double plasterboards : evalutation of design models

    Author : Tomas Filipsson; Luleå tekniska universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Abstract : This thesis presents a part of the ECSC-project Development of dry composite construction systems based on steel in residential application that focus on design recommendations for stabilizing buildings by using shear resistance in the walls. The existing design method suggested and used by the Swedish plasterboard manufacturer Gyproc AB is considered as a bit conservative and it does not consider double plasterboards properly. READ MORE

  3. 23. Patch loading resistance of plated girders : ultimate and serviceability limit state

    Author : Jonas Gozzi; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Abstract : Patch loading or partial edge loading of steel girder webs is a load case where a concentrated force is introduced perpendicular to the flange of a girder. This usually induces a local failure of the girder web in the vicinity of the loaded flange. READ MORE

  4. 24. Plastic behaviour of steel : experimental investigation and modelling

    Author : Jonas Gozzi; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Abstract : This thesis deals with the plastic behaviour of steel. It comprises an investigation with focus on biaxial tests and constitutive modelling. Tests were performed on one stainless steel grade in two different strength classes, C700 and C850, as well as one extra high strength structural steel grade. READ MORE

  5. 25. Patch loading : resistance of longitudinally stiffened steel girder webs

    Author : Carlos Graciano; Luleå tekniska universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Abstract : In most cases, longitudinal stiffeners increase the resistance of steel girder webs subjected to concentrated forces, commonly referred to as patch loading. During the last three decades, a number of experimental investigations have been undertaken in all over the world in this regard. READ MORE