Search for dissertations about: "TEKNIKVETENSKAP Teknisk mekanik"

Showing result 1 - 5 of 338 swedish dissertations containing the words TEKNIKVETENSKAP Teknisk mekanik.

  1. 1. Road surface characterization using near infrared spectroscopy

    University dissertation from Luleå : Luleå tekniska universitet

    Author : Johan Casselgren; [2011]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Engineering mechanics - Other engineering mechanics; Spektroskopi; Väglagsklassificering; Friktion; Väglagskarakterisering; Teknisk mekanik - Övrig teknisk mekanik; Experimental Mechanics; Experimentell mekanik;

    Abstract : This thesis presents a technology and method for classifying and characterizing different road conditions such as dry asphalt and asphalt covered with water, ice and snow. The method uses light sources of different wavelengths to illuminate the road surface and a detector to measure the reflected light from the road surfaces, dependent on how the surface have absorbed, scattered and polarized the light it is possible to classify the road condition. READ MORE

  2. 2. Coupled vibrations in horizontal and vertical rotor-bearings systems

    University dissertation from Luleå : Luleå tekniska universitet

    Author : Jean-Claude Luneno; [2010]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Technology - Engineering mechanics; Teknikvetenskap - Teknisk mekanik; Hållfasthetslära; Solid Mechanics;

    Abstract : For dynamical systems having several degrees of freedom, motion in one direction can induce motion in the other and/or vice versa. This means that there is a certain coupling between these two motions. Coupling can in some cases be a source of instability that causes self-excited vibrations in rotating machinery. READ MORE

  3. 3. Coupled vibrations in horizontal and vertical rotor-bearings systems

    University dissertation from Luleå : Luleå tekniska universitet

    Author : Jean-Claude Luneno; [2010]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Technology - Engineering mechanics; Teknikvetenskap - Teknisk mekanik; Hållfasthetslära; Solid Mechanics;

    Abstract : For dynamical systems having several degrees of freedom, motion in one direction can induce motion in the other and/or vice versa. This means that there is a certain coupling between these two motions. Coupling can in some cases be a source of instability that causes self-excited vibrations in rotating machinery. READ MORE

  4. 4. Hydro-mechanical forming of aluminium tubes on constitutive modelling and process design

    University dissertation from Institutionen för konstruktions- och produktionsteknik

    Author : Mikael Jansson; Larsgunnar Nilsson; Odd Sture Hopperstad; [2006]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hydroforming; Aluminium Extrusions; Anisotropic material; TECHNOLOGY Engineering mechanics Solid mechanics; TEKNIKVETENSKAP Teknisk mekanik Fastkroppsmekanik;

    Abstract : Tube hydroforming is a forming method which has several advantages. By using pressure in combination with material feeding it is possible to manufacture products with high structural integration and tight dimensional tolerances. The forming method is especially suited for aluminium alloys which have a relatively low ductility. READ MORE

  5. 5. Frictional Effects on Hertzian Contact and Fracture

    University dissertation from Stockholm : KTH

    Author : Denis Jelagin; Per-Lennart Larsson; Bertil Storåkers; David Hills; [2007]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Contact mechanics; Elastic material; Friction; Nanoindentation; Fracture; TECHNOLOGY Engineering mechanics Solid mechanics; TEKNIKVETENSKAP Teknisk mekanik Fastkroppsmekanik;

    Abstract : This thesis addresses normal axisymmetric contact of dissimilar elastic solids at finite interfacial friction. It is shown that in the case of smooth and convex but otherwise arbitrary contact profiles and monotonically increasing loading a single stick-slip contour evolves being independent of loading and profile geometry. READ MORE