Search for dissertations about: "Teknik och teknologier Kemiteknik Korrosionsteknik"

Showing result 1 - 5 of 23 swedish dissertations containing the words Teknik och teknologier Kemiteknik Korrosionsteknik.

  1. 1. Co-firing complex biomass in a CFB boiler : ash transformation, corrosion control and materials selection

    Author : Henrik Hagman; Dan Boström; Rainer Backman; Mats Lundberg; Lars-Erik Åmand; Umeå universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; ash transformation; process control; equilibrium calculations; boiler availability; failures; alloy selection; alloy degradation; vortex finder VF ; service life estimation; sulfation; chloridation; high temperature corrosion; biomass; waste derived fuels; forest residues; RDF; Biomal; slaughterhouse waste; peat; waste wood; industrial waste water treatment sludge; HAD; RSMT; Alloy 253MA; Alloy 310S; Alloy 800H HT; Alloy DS; Alloy 600;

    Abstract : The effects of greenhouse gas net emissions on global warming, stricter legislation on waste handling, and the pursuit of ever cheaper heat- and power production are all important factors driving the introduction of complex fuels in incineration plants. However - without fundamental knowledge regarding ash transformation, corrosion control, and materials selection – this introduction of potentially economically and environmentally beneficial fuels, might instead cause economic loss and environmentally adverse effects. READ MORE

  2. 2. Failure mechanisms in APS and SPS thermal barrier coatings during cyclic oxidation and hot corrosion

    Author : Krisha Praveen Jonnalagadda; Ru Lin Peng; Xin-Hai Li; Robert Eriksson; Shrikant Joshi; Linköpings universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; NATURVETENSKAP; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; NATURVETENSKAP; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY;

    Abstract : Thermal Barrier Coatings (TBCs) are advanced material systems that are being used in the hot sections of gas turbines such as combustor, turbine blades, and vanes. The top ceramic coating in TBCs provides insulation against the hot gases and the intermediate metallic bond coat provides oxidation and corrosion resistance to the underlying turbine components. READ MORE

  3. 3. Thermal Barrier Coatings : Failure Mechanisms and Life Prediction

    Author : Krishna Praveen Jonnalagadda; Ru Lin Peng; Xin-Hai Li; Robert Eriksson; Nicholls John; Linköpings universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; NATURVETENSKAP; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; NATURVETENSKAP; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY;

    Abstract : Thermal barrier coatings (TBCs) use in the hot sections of gas turbine engine enables them to run at higher temperatures, and as a consequence, achieve higher thermal efficiency. For full operational exploitation of TBCs, understanding their failure and knowing the service life is essential. READ MORE

  4. 4. Degradation Mechanisms of Heat Resistant Steel at Elevated Temperatures : In an Iron Ore Pelletizing Industry

    Author : Erik A. A. Nilsson; Marta-Lena Antti; Ragnar Tegman; Jan-Erik Svensson; Luleå tekniska universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; stainless steel; Grate-Kiln; microstructure; corrosion; as-casted; thermal cycling; erosion; deposition; Engineering Materials; Materialteknik;

    Abstract : This thesis focuses on the different degradation mechanisms of the stainless steel in a travelling grate in a Grate-Kiln iron ore pellet indurator. The travelling grate is a conveyor belt that transports green-body pellets to a rotary kiln while the pellets are being dried and pre-heated to a temperature of 900-1100 °C by recycled hot air. READ MORE

  5. 5. Atmospheric corrosion of copper and copper-based alloys in architecture : from native surface oxides to fully developed patinas

    Author : Tingru Chang; Inger Odnevall Wallinder; Tomas Prošek; KTH; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Chemical Engineering; Kemiteknik;

    Abstract : Copper and copper-based alloys are commonly used in both ancient and modern architecture. This requires an in-depth fundamental and applied understanding on their atmospheric corrosion behavior at different climatic, environmental and pollutant levels and how these parameters influence e.g. READ MORE