Search for dissertations about: "Tool Steel"
Showing result 1 - 5 of 206 swedish dissertations containing the words Tool Steel.
-
1. Tool steel for tool holder applications : microstructure and mechanical properties
Abstract : Large improvements in cutting tool design and technology, including the application of advanced surface engineering treatments on the cemented carbide insert, have been achieved in the last decades to enhance tool performance. However, the problem of improving the tool body material is not adequately studied. READ MORE
-
2. Toughness of Tool Steel
Abstract : Toughness is the ability to resist tensile stresses in the presence of a notch or crack. Sometimes gross cracking of industrial tools, mould or dies, occurs due to insufficient toughness. As the economic consequences of the gross cracking are serious, the toughness of industrial tool material, generally tool steel, is of paramount importance. READ MORE
-
3. The influence of tool steel microstructure on galling
Abstract : In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a sort of severe adhesive wear, which results in severe scratching of produced parts. READ MORE
-
4. A study of slag-steel-inclusion interaction during Ladle treatment
Abstract : The thesis is based on two supplements with two major objectives. In the first supplement equilibrium top slag-steel bulk and inclusions-steel bulk were investigated by comparison between calculated and measured oxygen activity values. This was done by applying different oxide activity models for slags combined with thermodynamic calculations. READ MORE
-
5. Polishability of tool steels : Characterisation of high gloss polished tool steels
Abstract : The manufacturing of plastic components, like a majority of other mass produced discrete parts, require well designed dies and moulds. Complex geometries and increasing demands on final surface appearance, which is strongly connected to the quality impression, are pushing for high demands on mould-makers and polishers as well as steel producers. READ MORE