Search for dissertations about: "Tool wear"

Showing result 1 - 5 of 171 swedish dissertations containing the words Tool wear.

  2. 1. On wear of wood-cutting tools : Tool materials, wear mechanisms and modelling

    Author : Johan Nordström; []
    Keywords : Tool material; Wood cutting; Wear; Modelling;

    Abstract : Bandsaw blades are commonly used in the sawmill industry for timber cutting. The saw teeth are gradually worn during cutting and will finally cause unacceptable surface roughness and dimensional deviations on the sawn wood product. Maintenance by re-sharpening of the saw teeth is therefore necessary after a certain time of sawing. READ MORE

  4. 2. Simulation of Wheel and Rail Profile Evolution : Wear Modelling and Validation

    Author : Roger Enblom; KTH; []
    Keywords : contact; wear; wear prediction; wear model; wheel profile; rail profile; simulation vehicle-track interaction; multibody simulation; MBS; TECHNOLOGY; TEKNIKVETENSKAP;

    Abstract : Numerical procedures for reliable wheel and rail wearprediction are rare. Recent development of simulationtechniques and computer power together with tribologicalknowledge do however suggest computer aided wear prediction. READ MORE

  5. 3. Machinability variations in Alloy 718 —With focus on machining of turbine components

    Author : Pajazit Avdovic; Industriell Produktion; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; polar diagram; flank wear; ceramic tool; variation in material; tool wear; tool life; machinability; Inconel; Alloy 718; Machining; notch wear;

    Abstract : In gas turbine engine, nickel base alloy, such as Alloy 718, accounts for almost half of the total material requirement. Nickel-base superalloys are used for gas turbine components mainly because of their outstanding strength and resistance to oxidation at high temperatures (> 550°C). READ MORE

  6. 4. Wear mechanisms in sheet metal forming : Effects of tool microstructure, adhesion and temperature

    Author : Anders Gåård; Pavel Krakhmalev; Jens Bergström; Ulf Olofsson; Karlstads universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Galling; sheet metal forming; wear; friction; adhesion; temperature; Materialteknik; Materials Engineering;

    Abstract : The general trend in the car body manufacturing industry is towards low-series production and reduction of press lubricants and car weight. The limited use of lubricants, in combination with the introduction of high and ultrahigh-strength sheet materials, continuously increases the demands on the forming tools. READ MORE

  7. 5. On Simulation of Uniform Wear and Profile Evolution in the Wheel - Rail Contact

    Author : Roger Enblom; Mats Berg; Simon Iwnicki; KTH; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wheel-rail contact; wear; wear prediction; wear model; wheel profile; rail; Vehicle engineering; Farkostteknik;

    Abstract : Numerical procedures for reliable wheel and rail wear prediction are rare. Recent development of simulation techniques and computer power together with tribological knowledge do however suggest computer aided wear prediction as possible. READ MORE