Search for dissertations about: "Transmission error measurement"
Showing result 1 - 5 of 26 swedish dissertations containing the words Transmission error measurement.
-
1. Development and evaluation of an independent system for absorbed dose calculations in radiotherapy
Abstract : The aim of this work was to develop, implement and evaluate an independent system with which to calculate the absorbed dose, delivered by high-energy X-ray beams, to the prescription point and the depth of dose maximum. The introduction of such a system in the clinical routine may help ensure high-quality treatment and avoidance of errors which may jeopardise the clinical outcome of the treatment (i. READ MORE
-
2. Low Frequency Impact Sound in Timber Buildings : Transmission Measurements and Simulations
Abstract : An increased share of multi-story buildings that have timber structures entails potential in terms of increased sustainability as well as human-friendly manufacturing and habitation. Timber buildings taller than two stories were prohibited in Europe until the 1990s due to fire regulations. In 1994, this prohibition was removed in Sweden. READ MORE
-
3. On Noise Generation and Dynamic Transmission Error of Gears
Abstract : Noise from heavy trucks is an important environmental issue. Several sources contribute to the total noise level of a vehicle, such as the engine, gearbox, tires, etc. The tonal noise from the gearbox can be very disturbing for the driver, even if the noise level from the gearbox is lower than the total noise level. READ MORE
-
4. Fiber optic parametric amplifiers in single and multi wavelength applications
Abstract : This thesis describes fiber optical parametricamplifiers (FOPAs) used in single- and multi-wavelength channel applications.The FOPA was operated as a pulse source in optical transmission systems at bit rates of 10-160 Gb/s. It was evaluated in terms of bit error rate after transmission with link lengths up to 650 km. READ MORE
-
5. Non-intrusive Methods for Mode Estimation in Power Systems using Synchrophasors
Abstract : Real-time monitoring of electromechanical oscillations is of great significance for power system operators; to this aim, software solutions (algorithms) that use synchrophasor measurements have been developed for this purpose. This thesis investigates different approaches for improving mode estimation process by offering new methods and deepening the understanding of different stages in the mode estimation process. READ MORE