Search for dissertations about: "Transonic flow"

Showing result 1 - 5 of 28 swedish dissertations containing the words Transonic flow.

  1. 1. Numerical Simulation of Some Heat Transfer and Fluid Flow Phenomena for Gas Turbine Blades and a Transonic Turbine Stage

    University dissertation from GTC,STEM

    Author : Fadil Mumic; [2006]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fluiddynamik; plasma; Thermal engineering; applied thermodynamics; plasmas; Gaser; fluid dynamics; Gases; transonic; numerical; heat transfer coefficient; shroud surface; squealer blade tip; flat blade tip; leakage flow; Termisk teknik; termodynamik; turbulence modeling;

    Abstract : With the attempts to achieve higher thermal efficiency, turbine blades are exposed to very high temperature gases and may undergo severe thermal stress and fatigue. Thus, in order to develop optimal cooling strategies and reduce the heat transfer it is important to obtain a good understanding of both the complex flow field and the heat transfer characteristics in turbine rotor/stator hot-gas passages. READ MORE

  2. 2. Transonic flow: large eddy simulation, numerical methods and subgrid modeling

    University dissertation from GTC,STEM

    Author : Christian Wollblad; [2006]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LES; SGS modeling; Transonic flow; semi-implicit numerical scheme; shock wave turbulent boundary layer interaction;

    Abstract : Shock wave turbulent boundary layer interactions (SWTBLI) commonly arise in turbomachinery and aerospace applications and on the exterior of high speed aircrafts. In all these cases, SWTBLI can significantly change the flow and hence the physical load imposed by it. READ MORE

  3. 3. Aerodynamic Investigations of a High Pressure Turbine Vane with Leading Edge Contouring at Endwall in a Transonic Annular Sector Cascade

    University dissertation from Stockholm : KTH Royal Institute of Technology

    Author : Ranjan Saha; KTH.; [2012]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; high pressure turbine; secondary flow; leading edge contouring; endwall; experimental investigations; losses; flow field; hub cooling flow; högtrycksturbinen sekundärströmning; framkantsmodifiering; ändvägg; experimentell undersökning; förluster; strömningsfält; filmkylning av inre platform;

    Abstract : Efficiency improvement is an important aspect to reduce the use of fossil-based fuel in order to achieve a sustainable future. Gas turbines are mainly fossil-fuel based turbomachines, and, therefore, efficiency improvement is still the subject of many on-going research activities in the gas turbine community. READ MORE

  4. 4. Numerical Computations of Internal Combustion Engine related Transonic and Unsteady Flows

    University dissertation from Stockholm : KTH

    Author : Olle Bodin; KTH.; [2009]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LES; Transonic flow; Hysteresis; Shock boundary-layer interaction; Exhaust valve; TECHNOLOGY Engineering mechanics Fluid mechanics; TEKNIKVETENSKAP Teknisk mekanik Strömningsmekanik;

    Abstract : Vehicles with internal combustion (IC) engines fueled by hydrocarbon compounds have been used for more than 100 years for ground transportation. During the years and in particular in the last decade, the environmental aspects of IC engines have become a major political and research topic. READ MORE

  5. 5. Modal Decomposition of Separated Nozzle Flow

    University dissertation from Stockholm : KTH

    Author : Ragnar Larusson; [2014]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Arnoldi; axisymmetric convergent-divergent nozzle; Mode Decomposision; Flow Separation; Resonance.; Dynamic Mode Decomposision; Computational Fluid Dynamics;

    Abstract : The applicability of two different eigenvalue algorithms coupled with an axisymmetric RANS solver to predict the eigenmodes of separated supersonic flow inside an axisymmetric convergent-divergent nozzle was investigated. These are the Arnoldi and the Dynamic Mode Decomposition (DMD) algorithms, respectively. READ MORE