Search for dissertations about: "Weldability"
Showing result 1 - 5 of 23 swedish dissertations containing the word Weldability.
-
1. Control of weldability : Research leading to the development of two new quenched and tempered tool steels
Abstract : The understanding of the hardenability is important in steel development with respect to weldability of steels as well as to the design of quenched and tempered steels.The common way to judge if steel is suitability to welding is the use of a carbon equivalent, which reflects the alloy content to the hardenability of the heat affected zone (HAZ). READ MORE
-
2. Weldability and Testing Methodology in Precipitation Hardening Superalloys
Abstract : Usable weldability data is desired in the manufacturing industry, especially within the aerospace industry where fabrication of structural jet engine components are realized. Welding of precipitation hardening superalloys such as Waspaloy®, Alloy 718, ATI® 718Plus™ and Haynes® 282® in particular can lead to solidification cracking in the fusion zone, liquation cracking in the heat affected zone and/or to solid state cracking. READ MORE
-
3. Weld Cracking in Precipitation Hardening Ni-based Superalloys
Abstract : Manufacturing of hot structural components for aero engines requires the materials being used to be weldable. The high demands on strength and temperature resistance make nickel based superalloys the material of choice for this application. READ MORE
-
4. Weld Cracking of Precipitation Hardening Ni-based Superalloys - Investigation of repair welding characteristics and susceptibility towards strain age cracking
Abstract : High temperature resistance and strength requirements make nickel-based superalloys the material of choice for the hot section of aero engines. Fabrication in terms of combining wrought and cast parts in the manufacturing of hot structural components enables component optimisation via the use of wrought high-strength parts, where geometrical constraints allow, and cast parts to produce complex geometries. READ MORE
-
5. Hot Cracking and Grain Boundary Weaknesses of Nickel - Based Superalloys
Abstract : Abstract Grain boundary weaknesses of nickel-based superalloys not only materialize during service in the hot turbine engine sections but also during the weld manufacturing. The performance, in this respect, of the most commonly used alloys at Volvo Aero Corporation (VAC), 718 and the higher temperature capacity Waspaloy, are therefore the main subjects for this thesis. READ MORE