Search for dissertations about: "Xin Liu"
Showing result 6 - 10 of 17 swedish dissertations containing the words Xin Liu.
-
6. Structure and Properties of Perovskite SrTiO3 and Na0.5K0.5NbO3 Thin Films Fabricated by rf Magnetron Sputtering
Abstract : Functional oxide thin films are getting more and more attention due to their unique dielectric, piezoelectric, ferroelectric, magnetic, superconducting properties. This thesis focuses on the growth, compositional control, and structure-property relationships of SrTiO3 and Na0.5K0.5NbO3 thin films. READ MORE
-
7. Failure mechanisms in APS and SPS thermal barrier coatings during cyclic oxidation and hot corrosion
Abstract : Thermal Barrier Coatings (TBCs) are advanced material systems that are being used in the hot sections of gas turbines such as combustor, turbine blades, and vanes. The top ceramic coating in TBCs provides insulation against the hot gases and the intermediate metallic bond coat provides oxidation and corrosion resistance to the underlying turbine components. READ MORE
-
8. Thermal Barrier Coatings : Failure Mechanisms and Life Prediction
Abstract : Thermal barrier coatings (TBCs) use in the hot sections of gas turbine engine enables them to run at higher temperatures, and as a consequence, achieve higher thermal efficiency. For full operational exploitation of TBCs, understanding their failure and knowing the service life is essential. READ MORE
-
9. Oxidation and Corrosion of New MCrAlX Coatings : Modelling and Experiments
Abstract : MCrAlY coatings (“M” for Ni and/or Co) are widely used for the protection of superalloy components operated at high temperatures such as in the hot sections of gas turbines. The exposure to high temperature can cause coating degradation due to oxidation or hot corrosion at the coating surface. READ MORE
-
10. Performance of MCrAlX coatings : Oxidation, Hot corrosion and Interdiffusion
Abstract : MCrAlY coatings (M=Ni and/or Co) are widely used for the protection of superalloy components against oxidation and hot corrosion in the hot sections of gas turbines. The drive for coating systems to bestow adequate oxidation and corrosion resistance upon the components becomes urgent as an inevitable result of the necessary improvement in engine combustion efficiency and service lifetime. READ MORE