Search for dissertations about: "abaqus"

Showing result 16 - 20 of 52 swedish dissertations containing the word abaqus.

  2. 16. On the Residual Stresses and Microstructure Formation of Aluminum-Silicon Cast Alloys

    Author : Mohsen Sadrossadat; Sten Johansson; Ru Lin Peng; Ingvar L Svensson; Linköpings universitet; []
    Keywords : Al-Si alloys; residual stresses; microstructure; microsegregation; nucleation behavior; modeling; TECHNOLOGY; TEKNIKVETENSKAP;

    Abstract : Cast aluminum-silicon alloys are being increasingly used in automotive and aerospace industries for critical structure applications because of their excellent castability, low density, acceptable mechanical properties and low cost. Different casting and heat treatment parameters largely affect the microstructure and residual stress of the components, which in turn, has a great impact on their mechanical properties. READ MORE

  4. 17. Shear walls with double plasterboards : evalutation of design models

    Author : Tomas Filipsson; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Abstract : This thesis presents a part of the ECSC-project Development of dry composite construction systems based on steel in residential application that focus on design recommendations for stabilizing buildings by using shear resistance in the walls. The existing design method suggested and used by the Swedish plasterboard manufacturer Gyproc AB is considered as a bit conservative and it does not consider double plasterboards properly. READ MORE

  5. 18. Elastoplasticity of Grey Cast Iron FE-Algorithms and Biaxial Experiments

    Author : Hans E. Hjelm; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Biaxial experiments; multiaxial elastoplastic behaviour; graphite flakes; FE-codes; hardening behaviour; graphitic grey cast iron;

    Abstract : This thesis focuses on multiaxial elastoplastic behaviour of graphitic grey cast iron with the aim to provide physically appropriate and numerically reliable constitutive relations for use in FE-codes. To achieve this goal, this work is divided into three parts: Biaxial experiments are performed on thin cruciform specimens. READ MORE

  6. 19. Nonlinear Creep Model of Paper and Corrugated Board Materials

    Author : Poorvi Patel; Teknisk logistik; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Technological sciences; Finite element modeling; Creep-recovery tests; Schapery creep equation; Localbuckling; Orthotropic materials; Teknik;

    Abstract : Models of the nonlinear creep behavior of paper, and of the global buckling , local buckling and creep buckling of corrugated board have been developed. The studies of creep and buckling were limited to climate conditions with constant relative humidity. First the short-term elastic buckling of corrugated board panels was studied. READ MORE

  7. 20. Moisture-induced stress and distortion of wood : A numerical and experimental study of wood's drying and long-term behaviour

    Author : Sara Florisson; Sigurdur Ormarsson; Johan Vessby; Kent Persson; Linnéuniversitetet; []
    Keywords : LANTBRUKSVETENSKAPER; AGRICULTURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; analytical method; calibration; controlled climate; creep; distortion; experimental methodology; FEM; fibre orientation; mechano-sorption; moisture transport; natural climate; Norway spruce; numerical model; three-dimensional; timber beam; validation; wood; Byggteknik; Civil engineering; Forestry and Wood Technology; Skog och träteknik;

    Abstract : With the current advances made in three-dimensional modelling of wood, it is possible to provide an overall picture of moisture flow, and moisture-induced stress and deformations, whereas previously, experiments only provided local measurements. The main aim of the doctoral thesis is to investigate the possibilities of the developed three-dimensional numerical model to predict the behaviour of wood when simultaneously exposed to a mechanical load and a particular climate. READ MORE