Search for dissertations about: "additive degradation product"
Showing result 1 - 5 of 9 swedish dissertations containing the words additive degradation product.
-
1. LDI-MS strategies for analysis of polymer degradation products, additives and drugs
Abstract : The advancement of mass spectrometry (MS) has been and continues to be a prominent analytical technique for highly accurate determination of analytes. The goal of this thesis was to develop new laser desorption ionization-mass spectrometric (LDI-MS) methods for analysis of polymer degradation products, additives and drugs. READ MORE
-
2. Powder degradation during powder bed fusion processing
Abstract : Powder bed fusion (PBF) techniques, including laser-based powder bed fusion (LB-PBF) and electron beam powder bed fusion (EB-PBF), are two rapidly growing additive manufacturing (AM) processes due to their ability to produce complex geometries in near-net shapes. To attain reproducibility and repeatability in PBF processes, a consistent set of powder properties is vital. READ MORE
-
3. Oxidative Degradation of Polyethylene - A Cause of Off-flavour
Abstract : Polyethylene is the most frequently used polymer material in food packaging today. The polymer is often processed by film extrusion and extrusion coating between 250°C and 325°C. READ MORE
-
4. Spray drying of particles intended for inhalation - Investigation of significant process variables and product characteristics, with focus on degradation and solid state properties
Abstract : The interest in spray drying for production of inhalable particles has grown considerably since the late 1980s. However, which process variables that control degradation and the solid state properties have not been subject to extensive research. This thesis deals with how important characteristics of inhalation particles can be controlled, i.e. READ MORE
-
5. Long-term performance of water repellants on rendered autoclaved aerated concrete
Abstract : Many failures of external walls made of porous buildingmaterials are caused by excessive moisture content,particularly after driving rain and under long duration ofmoist conditions. Lack of sufficient protection againstexposure conditions is one of the reasons for external wallsprematurely demonstrating failures, i.e. READ MORE