Search for dissertations about: "air flow"

Showing result 1 - 5 of 538 swedish dissertations containing the words air flow.

  1. 1. Investigations of Flow Patterns in Ventilated Rooms Using Particle Image Velocimetry : Applications in a Scaled Room with Rapidly Varying Inflow and over a Wall-Mounted Radiator

    Author : Amir Sattari; Ivo Martinac; Mats Sandberg; Dirk Müller; KTH; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Particle Image Velocimetry PIV ; experimental study; structured light 3D scanning system; ventilation; varying flow rate; room model; wall-mounted radiator; air; water; flow; Particle Image Velocimetry PIV ; experimentell studie; scanningsystem för strukturerat 3D-ljus; ventilation; varierande tilluftsflöde; rumsmodell; väggmonterad radiator; Teknisk mekanik; Engineering Mechanics; Civil and Architectural Engineering; Byggvetenskap; Energiteknik; Energy Technology;

    Abstract : This thesis introduces and describes a new experimental setup for examining the effects of pulsating inflow to a ventilated enclosure. The study aimed to test the hypothesis that a pulsating inflow has potential to improve ventilation quality by reducing the stagnation zones through enhanced mixing. READ MORE

  2. 2. Through air drying : The influence of formation and pulp type on non-uniform drying and air flow

    Author : Aron Tysén; Christophe Barbier; Lars Nilsson; Hannes Vomhoff; Stig Stenström; Karlstads universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Drying; Dewatering; Water removal; Moisture; Non-uniformity; Variability; Tissue; TAD; Through air drying; Thermography; Formation; Pulp; Chemical Engineering; Kemiteknik;

    Abstract : The removal of water is an integral part of tissue paper production. Through air drying (TAD) is used for water removal when producing premium tissue grade products, however, at the price of higher energy demand. A better understanding of TAD may therefore lower the energy demand. READ MORE

  3. 3. CFD MODELLING AND EXPERIMENTS ON AERATOR FLOW IN CHUTE SPILLWAYS

    Author : Penghua Teng; James Yang; Anders Wörman; Anton Schleiss; KTH; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Spillway Aerator; Cavitation; Air Entrainment; Two-phase Flow; VOF; Mixture Model; Two-Fluid Model; Air Cavity; Cavity Air Pressure; Air Concentration; Shadowgraphic Image Method SIM ; High-speed Particle Image Velocimetry HSPIV ; Bubble Tracking Method BTM ; luftningsramp; kavitation; luftinträngning; tvåfasflöde; VOF; Mixture Model; Two-Fluid Model; luftkavitet; kavitetslufttryck; luftkoncentration; skuggrafisk bildmetod; hastighetsmätning med höghastighetspartikelfotografering; bubbelspårningsmetod; Civil and Architectural Engineering; Byggvetenskap;

    Abstract : A chute spillway is a typical component of large dams for discharging floods. Because of the high water head, the flow velocity in the chute is often in excess of 20 m/s. Consequently, the structure is usually prone to cavitation damages. Flow aeration is evidenced to efficiently eliminate or to mitigate the damages. READ MORE

  4. 4. Flow Measuring Techniques in Steady and Pulsating Compressible Flows

    Author : Fredrik Laurantzon; Henrik Alfredsson; Björn Lindgren; KTH; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Flow measuring; compressible flow; steady flow; pulsating flow; hot-wire anemometry; cold-wire anemometry; Engineering mechanics; Teknisk mekanik;

    Abstract : This thesis deals with flow measuring techniques applied on steady and pulsatingflows. Specifically, it is focused on gas flows where density changes canbe significant, i.e. compressible flows. READ MORE

  5. 5. Flow measurements related to gas exchange applications

    Author : Fredrik Laurantzon; Henrik Alfredsson; Venkatesa Vasanta Ram; KTH; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flow meters; vortex flow meters; compressible flow; pulsating flow; hot-wire anemometry; cold-wire anemometry; time resolved measurements; wavelet analysis;

    Abstract : This thesis deals with flow measuring techniques applied to steady and pulsating gas flows relevant to gas exchange systems for internal combustion engines. Gas flows in such environments are complex, i.e. they are inhomogeneous, three-dimensional, unsteady, non-isothermal and exhibit significant density changes. READ MORE