Search for dissertations about: "al-si"
Showing result 1 - 5 of 46 swedish dissertations containing the word al-si.
-
1. On the influence of imperfections on microstructure and properties of recycled Al-Si casting alloys
Abstract : There are great energy savings to be made by recycling aluminium; as little as 5% of the energy needed for primary aluminium production may be required. Striving to produce high quality aluminium castings requires knowledge of microstructural imperfections, which is extra important when casting recycled aluminium that generally contains higher levels of imperfections compared to primary aluminium. READ MORE
-
2. Eutectic Modification of Al-Si casting alloys
Abstract : Aluminum alloys with silicon as the major alloying element are the most widely used aluminum casting alloys. The eutectic phase in these alloys is formed by hard and brittle silicon plates in an aluminum matrix. Such silicon plates can act as crack propagation paths deteriorating the toughness of the material. READ MORE
-
3. Investigations on the Formation of Defect Bands in Semi-Solid High Pressure Die Cast Aluminium-Silicon Alloys
Abstract : High-pressure die casting of semi-solid aluminium-silicon alloys is used in the automotive industry to manufacture components, like housings, brackets, and bars. It is commonly known that during high-pressure die casting, defect bands may be created that follow the contour of the component surface. These bands consist mainly of a eutectic phase. READ MORE
-
4. Al-Si Cast Alloys - Microstructure and Mechanical Properties at Ambient and Elevated Temperature
Abstract : Aluminium alloys with Si as the major alloying element form a class of material providing the most significant part of all casting manufactured materials. These alloys have a wide range of applications in the automotive and aerospace industries due to an excellent combination of castability and mechanical properties, as well as good corrosion resistance and wear resistivity. READ MORE
-
5. Heat treatment of Al-Si-Cu-Mg casting alloys
Abstract : Environmental savings can be made by increasing the use of aluminium alloys in the automotive industry as the vehicles can be made lighter. Increasing the knowledge about the heat treatment process is one task in the direction towards this goal. The aim of this work is to investigate and model the heat treatment process for Al-Si casting alloys. READ MORE