Search for dissertations about: "alloy steel"
Showing result 1 - 5 of 166 swedish dissertations containing the words alloy steel.
-
1. Modeling framework for ageing of low alloy steel
Abstract : Ageing of low alloy steel in nuclear applications commonly takes the form as a hardening and an embrittlement of the material. This is due to the evolution of the microstructure during irradiation and at purely thermal conditions, as a combination or separate. READ MORE
-
2. Deposit Induced Corrosion in Biofuel Combustion
Abstract : Deposit induced corrosion is one of the main mechanisms for attack on heat exchangers in biofuel boilers. This severe corrosion decreases the obtainable steam temperature in boilers, thereby the efficiency in production of electricity is reduced. Deposit formation from the gas on superheater tubes are is generally referred to as fouling. READ MORE
-
3. Study of Non-metallic Inclusion in Alloy 825
Abstract : It is well known that inclusions affect the properties of steels and alloys. Therefore, it is important to understand what type of inclusions that exist and how they behave and especially with a focus on large size inclusions. READ MORE
-
4. Development of Structural Steels for Powder Bed Fusion - Laser Beam
Abstract : Over the past decade, powder bed fusion – laser beam (PBF-LB) has attracted noticeable attention from both academia and industry. However, there remains a scarcity of approved material for the process, as fewer than 40 alloys are commercially available. READ MORE
-
5. Improved mapping of steel recycling from an industrial perspective
Abstract : The results from this study show that it is possible to obtain data series on the steel scrap collection based on mass balance model on the crude steel production figures by steelmaking reactor type and additional knowledge on process metallurgy as well as information on inputs and outputs into the reactors with an area correlation coefficient of 0,91 compared to data obtained from trade statistics. Furthermore, the study shows that based on a new method it is possible to calculate the time duration of mass flows on a continuous basis. READ MORE