Search for dissertations about: "aluminium etching"

Showing result 1 - 5 of 12 swedish dissertations containing the words aluminium etching.

  2. 1. Micromachining by sacrificial aluminium etching

    Author : David Westberg; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; sacrificial aluminium etching; SALE; CMOS-compatible micromachining; aluminium etching; densitometer; surface micromachining; nozzle; sacrificial etching; inkjet;

    Abstract : .... READ MORE

  4. 2. The Effect of Processing Parameters and Alloy Composition on the Microstructure Formation and Quality of DC Cast Aluminium Alloys

    Author : Majed Jaradeh; Torbjörn Carlberg; Lars Arnberg; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminium wrought alloys; AA3xxx and 6xxx; Direct Chill Casting; Unidirectional Solidification; Bridgman technique; Process parameters; Microstructure; Composition modification; Thermal analysis; Inclusions; Metallographical investigations; Metallurgical process engineering; Metallurgisk processteknik;

    Abstract : The objective of this research is to increase the understanding of the solidification behaviour of some industrially important wrought aluminium alloys. The investigation methods range from direct investigations of as-cast ingots to laboratory-scale techniques in which ingot casting is simulated. READ MORE

  5. 3. An Insight into the Critical Role of Microstructure and Surface Preparation on Localized Conversion Coating Deposition on Cast Al Alloys

    Author : Salil Sainis; Caterina Zanella; Ehsan Ghassemali; Marjorie Olivier; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aluminium alloys; cast Al-Si alloys; conversion coating treatment; cerium; localized deposition; surface preparation; microstructure; SEM; FIB-SEM; AFM-SKPFM; Aluminiumlegeringar; gjutna Al-Si legeringar; Cerium; lokal deposition; omvandlingsbeläggningsbehandling; förbehandling av yta; mikrostruktur; SEM; FIB-SEM; AFM-SKPFM;

    Abstract : The spontaneous cerium conversion coating formation over aluminium alloys is affected by the chemical process conditions, the surface preparation prior to conversion treatment and the microstructure of the underlying alloy. Most research performed until now focus only on the former whereas the influence of the latter two is poorly understood. READ MORE

  6. 4. The influence of Al alloy microstructure on conversion coating formation

    Author : Salil Sainis; Caterina Zanella; Ehsan Ghassemali; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aluminium alloys; cast Al-Si alloys; conversion coating treatment; cerium; localized deposition; surface pre-treatments; microstructure; SEM; FIB-SEM; AFM-SKPFM; aluminiumlegeringar; gjutna Al-Si legeringar; omvandlingsbeläggningar; cerium; lokaliserad deposition; ytförbehandlingar; microstruktur SEM; FIB-SEM; AFM-SKPFM;

    Abstract : The formation of conversion coatings based on Ce, trivalent Cr and Ti/Zr is triggered by the local pH increase at cathodic IM sites of the aluminium alloy microstructure. The pH gradient is created over the cathodic intermetallic (IM) sites of the microstructure and its intensity is influenced by their activity which depends on their chemical composition, their size, and spatial distribution. READ MORE

  7. 5. Silicon nanowire based devices for More than Moore Applications

    Author : Ganesh Jayakumar; Per-Erik Hellström; Mikael Östling; Luca Selmi; KTH; []
    Keywords : silicon nanowire; biosensor; CMOS; sequential integration; lab-on-chip; LOC; high-K; high-K integration on SiNW biosensor; ALD; fluid gate; back gate; SiNW; SiNW pixel matrix; FEOL; pattern transfer lithography; sidewall transfer lithography; STL; multi-target bio detection; BEOL; nanonets; silicon nanonets; SiNN-FET; SiNW-FET; CMOS integration of nanowires; CMOS integration of nanonets; monolithic 3D integration of nanowires; above-IC integration of nanowires; DNA detection using SiNW; SiNW biosensor; dry environment DNA detection; DNA hybridization detection using SiNW; SiNW functionalization; SiNW silanization; SiNW grafting; FEOL integration of SiNW; BEOL integration of SiNW; sequential multiplexed biodetection; biodetection efficiency of SiNW; front end of line integration of SiNW; back end of line integration of SiNW; SiNW dry environment functionalization; APTES cross-linker; accessing SiNW test site; fluorescence microscopy of SiNW; geometry of SiNW; SiNW biosensor variability; top-down fabrication of SiNW; bottom-up fabrication of SiNW; VLS method; ams foundry CMOS process; adding functionality in BEOL process; sensor integration in BEOL process; hafnium oxide; HfO2; aluminium oxide; Al2O3; TiN backgate; Nickel source drain; ISFET; ion sensitive field effect transistor; Overcoming Nernst limit of detection using SiNW; SiNW sub-threshold region operation; ASIC; SOC; SiGe selective epitaxy; epitaxial growth of SiNW; epitaxial growth of nanowires; epitaxial growth of nanonets; nickel silicide contacts; salicide process; high yield SiNW fabrication; high volume SiNW fabrication; silicon ribbon; SiRi pixel; SiRi biosensor; SiRi DNA detection; monolithic 3D integration of nanonets; above-IC integration of nanonets; impact of back gate voltage on silicon nanowire; impact of back gate voltage on SiNW; FDSOI; fully depleted silicon on insulator technology; metal backgate; wafer scale integration of SiNW; wafer scale integration of nanonets; impact of backgate voltage on CMOS inverter circuit; frequency divider; D flip-flop; Informations- och kommunikationsteknik; Information and Communication Technology;

    Abstract : Silicon nanowires (SiNW) are in the spotlight for a few years in the research community as a good candidate for biosensing applications. This is attributed to their small dimensions in nanometer scale that offers high sensitivity, label-free detection and at the same time utilizing small amount of sample. READ MORE