Search for dissertations about: "bed porosity"

Showing result 6 - 10 of 39 swedish dissertations containing the words bed porosity.

  2. 6. Detecting, Modelling and Measuring Disturbances in Fixed-bed Combustion

    Author : Sven Hermansson; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CFD modelling; solid fuels; grate furnaces; moisture content; fixed bed; combustion;

    Abstract : Combustion of fixed fuel beds in grate furnaces is one of the most common techniques within production of heat and power from solid fuels. The grate furnace used to be a working horse for combustion of hard coal, while today the incitement of using renewable fuel sources has turned biomass and municipal waste into dominating fuel types. READ MORE

  4. 7. Powder Bed Structure and Imbibition - A Study of Spray Dried Dairy Powders

    Author : Erik Börjesson; Livsmedelsteknik; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; powder bed structure; Imbibition; powder morphology; porous media;

    Abstract : The formation of lumps during powder dissolution is undesirable in most cases. In a world where the use of dry products is increasing, incomplete powder dissolution and lump formation can for instance affect the color of a paint or the nutritional content of baby food. READ MORE

  5. 8. Powder degradation during powder bed fusion processing: impact of processing conditions and alloy composition

    Author : Ahmad Raza; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; residual oxygen; powder bed fusion – electron beam; powder degradation; oxidation; Alloy 718; AlSi10Mg; powder bed fusion - laser beam; TiAl6V4; Hastelloy X.; sublimation; spatter particles; Keywords: additive manufacturing;

    Abstract : In the recent decade, powder bed fusion (PBF) metal additive manufacturing (AM) has attracted huge attention both from the industry and the research community. This effort has helped mature PBF technology as a potential alternative to conventional manufacturing processes as casting, machining, forging, etc. READ MORE

  6. 9. Electron beam powder bed fusion processing of stainless steels

    Author : Stefan Roos; Lars-Erik Rännar; Andrei Koptioug; Carlos Alberto Botero Vega; Iain Todd; Mittuniversitetet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Electron beam powder bed fusion; PBF-EB; Stainless steel; Mechanical properties; Micro-structure; Nanoindentation;

    Abstract : Additive manufacturing (AM) is still a relatively new technology. In contrast to traditional machining where material is removed from a blank, AM is used to fuse a feedstock material into complex shapes, layer by layer, starting from an empty workspace. READ MORE

  7. 10. Development of Structural Steels for Powder Bed Fusion - Laser Beam

    Author : William Hearn; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; tensile properties; in situ tempering; process development; martensite; additive manufacturing; cold cracking; low-alloy steel; structural steel; powder bed fusion – laser beam; carbon steel;

    Abstract : Over the past decade, powder bed fusion – laser beam (PBF-LB) has attracted noticeable attention from both academia and industry. However, there remains a scarcity of approved material for the process, as fewer than 40 alloys are commercially available. READ MORE