Advanced search
Showing result 1 - 5 of 163 swedish dissertations matching the above criteria.
-
1. A systematic approach for major renovation of residential buildings
Abstract : In Sweden, buildings are responsible for about 40 % of total energy use and about 10 % of total CO2 emissions Today more than 60 % of existing Swedish residential buildings are over 40 years old and are in need of major renovation. In addition, 15 % of all multi-family buildings and 27 % of all single-family houses were built before 1945. READ MORE
-
2. Direct-Ground Cooling Systems for Office Buildings: Design and Control Considerations
Abstract : Direct-ground cooling systems are defined as systems in which the ground is used as the only source for cooling mainly in commercial buildings. These systems benefit from exchanging heat with the ground, of which its temperature is basically constant below a certain depth year around. READ MORE
-
3. Thermal modelling and evaluation of borehole heat transfer
Abstract : The use of ground source heat pump systems to provide heating and cooling inbuildings has increased greatly in the last decade or so. These systems have a highpotential for energy efficiency, which has environmental and economicadvantages. READ MORE
-
4. Stainless Steel Corrugated Web Girders for Composite Road Bridges: Concept Evaluation and Flange Buckling Resistance
Abstract : Achieving a sustainable bridge design requires careful consideration of economic viability and environmental impact over the entire lifespan of the structure. While stainless steel is recognized for its excellent life cycle performance, its high cost prevents it from being used to a larger extent in bridges. READ MORE
-
5. Utilizing solar energy for anti-icing road surfaces using hydronic heating pavement with low temperature
Abstract : During summer, the surface temperature of an asphalt road pavement can rise up to 70°C due to absorbed solar radiation. The high temperature degrades the performance of the asphalt concrete by accelerating the thermal oxidation and plastic deformation, especially under heavy traffic loads. READ MORE