Search for dissertations about: "carbide tool"
Showing result 1 - 5 of 51 swedish dissertations containing the words carbide tool.
-
1. Tool steel for tool holder applications : microstructure and mechanical properties
Abstract : Large improvements in cutting tool design and technology, including the application of advanced surface engineering treatments on the cemented carbide insert, have been achieved in the last decades to enhance tool performance. However, the problem of improving the tool body material is not adequately studied. READ MORE
-
2. Performance of advanced tool steels for cutting tool bodies
Abstract : Performance of indexable insert cutting tools is not only about the performance of cutting inserts. It is also about the cutting tool body, which has to provide a secure and accurate insert positioning as well as its quick and easy handling under severe working conditions. READ MORE
-
3. Influence of microstructure on fatigue and ductility properties of tool steels
Abstract : Fatigue and ductility properties in various tool steels, produced by powder metallurgy, spray forming or conventionally ingot casting, have been analysed experimentally and successfully compared to developed models. The models are able to predict the fatigue limit and cause for fatigue fracture, and strain- and stress-development until fracture during the ductile fracture process respectively. READ MORE
-
4. The effect of workpiece material and its microstructure on tool wear in metal cutting
Abstract : The aim of the present work is to promote the basic understanding of how the workpiece material and its microstructure affect the tool wear during metal cutting. To isolate the effect of the workpiece material, the tool material (uncoated cemented carbide) was kept constant while the workpiece was varied. READ MORE
-
5. On wear of wood-cutting tools : Tool materials, wear mechanisms and modelling
Abstract : Bandsaw blades are commonly used in the sawmill industry for timber cutting. The saw teeth are gradually worn during cutting and will finally cause unacceptable surface roughness and dimensional deviations on the sawn wood product. Maintenance by re-sharpening of the saw teeth is therefore necessary after a certain time of sawing. READ MORE