Search for dissertations about: "cast Al-Si alloys"
Showing result 1 - 5 of 13 swedish dissertations containing the words cast Al-Si alloys.
-
1. Investigations on the Formation of Defect Bands in Semi-Solid High Pressure Die Cast Aluminium-Silicon Alloys
Abstract : High-pressure die casting of semi-solid aluminium-silicon alloys is used in the automotive industry to manufacture components, like housings, brackets, and bars. It is commonly known that during high-pressure die casting, defect bands may be created that follow the contour of the component surface. These bands consist mainly of a eutectic phase. READ MORE
-
2. An Insight into the Critical Role of Microstructure and Surface Preparation on Localized Conversion Coating Deposition on Cast Al Alloys
Abstract : The spontaneous cerium conversion coating formation over aluminium alloys is affected by the chemical process conditions, the surface preparation prior to conversion treatment and the microstructure of the underlying alloy. Most research performed until now focus only on the former whereas the influence of the latter two is poorly understood. READ MORE
-
3. Heat treatment of Al-Si-Cu-Mg casting alloys
Abstract : Environmental savings can be made by increasing the use of aluminium alloys in the automotive industry as the vehicles can be made lighter. Increasing the knowledge about the heat treatment process is one task in the direction towards this goal. The aim of this work is to investigate and model the heat treatment process for Al-Si casting alloys. READ MORE
-
4. Al-Si Cast Alloys - Microstructure and Mechanical Properties at Ambient and Elevated Temperature
Abstract : Aluminium alloys with Si as the major alloying element form a class of material providing the most significant part of all casting manufactured materials. These alloys have a wide range of applications in the automotive and aerospace industries due to an excellent combination of castability and mechanical properties, as well as good corrosion resistance and wear resistivity. READ MORE
-
5. The influence of Al alloy microstructure on conversion coating formation
Abstract : The formation of conversion coatings based on Ce, trivalent Cr and Ti/Zr is triggered by the local pH increase at cathodic IM sites of the aluminium alloy microstructure. The pH gradient is created over the cathodic intermetallic (IM) sites of the microstructure and its intensity is influenced by their activity which depends on their chemical composition, their size, and spatial distribution. READ MORE