Search for dissertations about: "casting steel"

Showing result 1 - 5 of 79 swedish dissertations containing the words casting steel.

  2. 1. A Study on Particle Motion and Deposition Rate : Application in Steel Flows

    Author : Peiyuan Ni; Pär Jönsson; Lage Jonsson; Mikael Ersson; Stein Tore Johansson; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; steel flow; ladle teeming; continuous casting; non-metallic inclusion behavior; particle deposition; nozzle clogging; numerical simulation.;

    Abstract : Non-metallic inclusions in molten steel have received worldwide attention due to their serious influence on both the steel product quality and the steel production process. These inclusions may come from the de-oxidation process, the re-oxidation by air and/or slag due to an entrainment during steel transfer, and so on. READ MORE

  4. 2. Oscillation Mark Formation in Continuous Casting Processes

    Author : Jessica Elfsberg; KTH; []
    Keywords : continuous casting; oscillation marks; steel; copper;

    Abstract : .... READ MORE

  5. 3. An Experimental Study to Improve the Casting Performance of Steel Grades Sensitive for Clogging

    Author : Jennie Svensson; Pär Jönsson; Voicu Brabie; Lauri Holappa; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Preheating; Decarburization; RBM; Clogging; SEN; Plasma sprayed coating; CaTiO3; YSZ; Continuous casting; Pilot plant trials; Industrial plant trials; Clean steel; Tundish; Non-metallic inclusions; MISS; Materials Science and Engineering; Teknisk materialvetenskap; Steel Forming and Surface Engineering;

    Abstract : In this study, the goal is to optimize the process and to reduce the clogging tendency during the continuous casting process. The focus is on clogging when the refractory base material (RBM) in the SEN is in contact with the liquid steel. READ MORE

  6. 4. On particles and slags in steel casting

    Author : Dimitrios Siafakas; Anders E.W. Jarfors; Taishi Matsushita; Sridhar Seetharaman; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hadfield steel; deoxidation; grain size; inoculation; particles; viscosity; slag;

    Abstract : Hadfield steel is widely accepted as one of the most important steel alloys utilized in industrial applications where high impact strength and wear resistance is required. Like in most metallic alloys used for component casting, the mechanical properties of Hadfield steel are directly connected with the microstructure of the material. READ MORE

  7. 5. A Study of the Initial Mould Filling during Up-hill Ingot Casting

    Author : Line Hallgren; Pär Jönsson; Anders Tilliander; Seppo Louhenkilpi; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirling flow; up-hill teeming; nozzle; casting; fluid flow; modelling; CFD; LDA; swirl; ingot casting; filling; red eye;

    Abstract : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. READ MORE