Search for dissertations about: "cavities"

Showing result 1 - 5 of 169 swedish dissertations containing the word cavities.

  1. 1. Initial Oxidation of β-NiAl(Pt) Coatings and Model Alloys

    Author : Henrik Svensson; [2006]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; FIB-SEM; SEM; #946; TEM; Diffusion Coatings; Metal-Oxide Interface; High Temperature Oxidation; Cavities; Platinum; -NiAl;

    Abstract : The aim of this work was to investigate the oxidation properties of NiAl coatings and model materials during high temperature oxidation. One of the important issues was to elucidate the beneficial role of Pt additions. A better understanding of the involved processes provides a key for the further improvement of the coatings performance. READ MORE

  2. 2. Detection of Partial Discharges at Fast Rising Voltages

    Author : Thomas Hammarström; [2011]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Partial discharges; cavities; repetitive voltages; high dV dt.; square like voltages; short rise time; measurements;

    Abstract : The present demand for higher efficiency and flexibility in the energy sector has ledto an increased use of power electronic generated waveforms as these allow energyconversion between different frequencies including DC. The generated waveformsare usually synthesized by so called Pulse Width Modulation (PWM) techniques,where the desired waveform is approximated by a number of square shaped pulseswith a short rise time. READ MORE

  3. 3. Partial Discharges at Fast Rising Voltages

    University dissertation from ; Chalmers tekniska högskola; Gothenburg

    Author : Thomas Hammarström; [2014]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; short rise time; cavities; high dV dt.; measurements; Partial discharges; square like voltages; repetitive voltages;

    Abstract : The present demand for higher efficiency and flexibility in the energy sector has led to an increased use of power electronic generated waveforms as these allow energy conversion between different frequencies including DC. The generated waveforms are usually synthesized by so called Pulse Width Modulation (PWM) techniques, where the desired waveform is approximated by a number of square shaped pulses with a short rise time. READ MORE

  4. 4. InP-based photonic crystals Processing, Material properties and Dispersion effects

    University dissertation from Stockholm : KTH

    Author : Audrey Berrier; KTH.; [2008]
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; Photonic crystals; indium phosphide; photonic bandgap; Bloch modes; slow light; dispersion; coupled cavity waveguides; chemically assisted ion beam etching; lag effect; cavities; optical losses; carrier transport; carrier lifetimes; negative refraction; photonic bandstructure; NATURAL SCIENCES Physics; NATURVETENSKAP Fysik;

    Abstract : Photonic crystals (PhCs) are periodic dielectric structures that exhibit a photonic bandgap, i.e., a range of wavelength for which light propagation is forbidden. The special band structure related dispersion properties offer a realm of novel functionalities and interesting physical phenomena. READ MORE

  5. 5. Acoustic excitation and transmission of lightweight structures

    University dissertation from Div. Engineering Acoustics, LTH

    Author : Jonas Brunskog; Lunds universitet.; Lund University.; [2002]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; point mobility; Lamb waves; wood.; Building construction; plate excitation; cavities; near-periodicity; nearly periodic; sound insulation; timber; structural acoustics; spatial Fourier transform; resilient device; prediction model; periodic; lightweight; ISO tapping machine; airborne noise; Building acoustics; impact noise; Byggnadsteknik;

    Abstract : Popular Abstract in Swedish För att öka förståelsen för hur ljud sprider sig och strålar från byggnadskonstruktioner utförda i lättbyggnadsteknik så behövs teoretiska beräkningsmodeller. Sådana modeller presenteras i avhandlingen. READ MORE