Search for dissertations about: "coating"

Showing result 1 - 5 of 739 swedish dissertations containing the word coating.

2. 1. Quantitative microscopy of coating uniformity

   Author : Christina Dahlström; Tetsu Uesaka; Magnus Norgren; Mittuniversitetet; []
   Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Coating uniformity; coating microstructure uniformity; base sheet effects; argon ion beam milling; scanning electron microscopy; image analysis; binder distributions; autocorrelation analysis; random deposition process; simulation;

   Abstract : Print quality demands for coated papers are steadily growing, and achieving coating uniformity is crucial for high image sharpness, colour fidelity, and print uniformity. Coating uniformity may be divided into two scales: coating thickness uniformity and coating microstructure uniformity, the latter of which includes pigment, pore and binder distributions within the coating layer. READ MORE

4. 2. Particle Coating in a Wurster Type Bed

   Author : Stina Karlsson; Chalmers University of Technology; []
   Keywords : TEKNIK OCH TEKNOLOGIER; MEDICIN OCH HÄLSOVETENSKAP; ENGINEERING AND TECHNOLOGY; MEDICAL AND HEALTH SCIENCES; Drying; Particle; Tracking technique; Spouted bed; Fluidisation; Multiphase flow; CFD; Trajectory; Coating; Wurster;

   Abstract : The Wurster bed process is frequently used for film coating. In the Wurster bed, particles circulate in the equipment and are sprayed with a liquid which forms a coating when dry. The procedure is repeated until the desired characteristics of the coating layer are obtained. READ MORE

5. 3. Printability and Ink-Coating Interactions in Inkjet Printing

   Author : Erik Svanholm; Göran Ström; Gunnar Engström; Janet Preston; Karlstads universitet; []
   Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; coating; inkjet; print quality; printability; pigment; silica; polyvinyl alcohol; colorant; ink absorption; Chemical engineering; Kemiteknik; Chemical Engineering; Kemiteknik;

   Abstract : Inkjet is a digital printing process where the ink is ejected directly onto a substrate from a jet device driven by an electronic signal. Most inkjet inks have a low viscosity and a low surface tension, which put high demands on the coating layer’s porosity and absorbency characteristics. READ MORE

6. 4. Interfacial Adhesion Failure : Impact on print-coating surface defects

   Author : Hajer Kamal Alm; Lars Wågberg; Göran Ström; Janet Preston; KTH; []
   Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Ink-paper coating adhesion; offset printing; calcium carbonate pigments; polyacrylate; dispersant; print mottle; surface chemistry; hygroscopy of surfaces; coating structure; print quality; water interference mottle; Fiber- och polymervetenskap; Fibre and Polymer Science;

   Abstract : The aim of this work was to develop a solid knowledge on formulation effects controlling offset ink-paper coating adhesion and to identify key factors of the coating and printing process affecting it. Focus lay on comprehending the impact of pigment dispersant on ink-paper coating adhesion and ultimately on the print quality of offset prints. READ MORE

7. 5. Variations Related to Print Mottle in Starch-Containing Paper Coatings

   Author : Micael Ragnarsson; Lars Järnström; Gunnar Engström; Martti Toivakka; Karlstads universitet; []
   Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; pigment coating; porosity variations; coating structure; coat weight variations; starch; dextrin; CMC; latex; print mottle; calendering; pilot coating; offset printing; Chemical Engineering; Kemiteknik;

   Abstract : Starch in paper coatings is known to increase the risk of print mottle in lithographic offset printing. The objective of this study was to increase the understanding of this behaviour. READ MORE