Search for dissertations about: "condition monitoring"

Showing result 1 - 5 of 180 swedish dissertations containing the words condition monitoring.

  1. 1. Predictive Health Monitoring for Aircraft Systems using Decision Trees

    University dissertation from Linköping : Linköping University Electronic Press

    Author : Mike Gerdes; Petter Krus; Diego Galar; [2014]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Condition Monitoring; Condition Prediction; Failure Prediction; Decision Trees; Genetic Algorithm; Fuzzy Decision Tree Evaluation; System Monitoring; Aircraft Health Monitoring;

    Abstract : Unscheduled aircraft maintenance causes a lot problems and costs for aircraft operators. This is due to the fact that aircraft cause significant costs if flights have to be delayed or canceled and because spares are not always available at any place and sometimes have to be shipped across the world. READ MORE

  2. 2. Failure Monitoring and Asset Condition Assessment in Water Supply Systems

    University dissertation from Department of Industrial Electrical Engineering and Automation, Lund Institute of Technology

    Author : Dalius Misiunas; [2005]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mechanical engineering; reglerteknik; robotteknik; Automatiska system; Water supply; failure; detection; monitoring; location; bursts; hydraulics; leakage; asset management; condition assessment; pipelines; pipe networks; Automation; control engineering; robotics; vacuum technology; vibration and acoustic engineering; Maskinteknik; hydraulik; vakuumteknik; vibrationer; akustik;

    Abstract : In this thesis, different aspects of failure management in urban water supply systems are discussed. As assets are getting older, the number of pipe failures is increasing and an efficient failure management strategy becomes important. READ MORE

  3. 3. Condition monitoring of railway vehicles a study on wheel condition for heavy haul rolling stock

    University dissertation from Luleå : Luleå tekniska universitet

    Author : Mikael Palo; [2012]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Drift och underhållsteknik; Operation and Maintenance;

    Abstract : A railway is an energy efficient mode of transport as it uses the low resistance contact between wheel and rail. This contact is not frictionless and causes wear on both surfaces. The wheel-rail guidance is made possible by the shapes of wheel and rail profiles. READ MORE

  4. 4. Predictive Health Monitoring for Aircraft Systems using Decision Trees and Genetic Evolution

    University dissertation from Luleå University of Technology

    Author : Mike Gerdes; Diego Galar; Uday Kumar; Dieter Scholz; Piotr Bilski; [2019]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Condition Monitoring; Remaining Useful Life Prediction; Decision Tree; Genetic Algorithm; Fuzzy Decision Tree Evaluation; System Monitoring; Aircraft Health Monitoring; Feature Extraction; Feature Selection; Data Driven; Health Prognostic; Knowledge Based System; Supervised Learning; Data-Driven Predictive Health Monitoring; Health Indicators; Machine Learning; Big Data; Pattern Recognition; Drift och underhållsteknik; Operation and Maintenance;

    Abstract : Reducing unscheduled maintenance is important for aircraft operators. There are significant costs if flights must be delayed or cancelled, for example, if spares are not available and have to be shipped across the world. READ MORE

  5. 5. Condition Monitoring in Machining Using Internal Sensor Signals

    University dissertation from Universitetsservice US AB

    Author : Jari Repo; Cornel Mihai Nicolescu; Terje Lien; [2012]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Condition monitoring; machine tool; machining process; milling; position encoders; tool wear detection; signal analysis; Manufacturing and materials engineering; Produktions- och materialteknik;

    Abstract : Condition monitoring of critical machine tool components and machining processes is a key factor to increase the availability of the machine tool and to achieve a more robust machining process. Any failure in the machining process and machine tool components may have negative effects on the final produced part. READ MORE