Search for dissertations about: "controlled emission"
Showing result 6 - 10 of 137 swedish dissertations containing the words controlled emission.
-
6. The influence of graphite morphology on the elastic behaviour of cast irons
Abstract : The morphology of the graphite phase largely controls the resulting properties of different grades of cast iron. In flake graphite cast irons, the mechanical properties are low while the thermal conductivity is high. In contrast, with spheroidal graphite cast irons, the mechanical properties are high while the thermal conductivity is low. READ MORE
-
7. Influences of the Graphite Phase on Elastic and Plastic Deformation Behaviour of Cast Irons
Abstract : The amount and morphology of the graphite phase largely controls the resulting properties of cast iron. For instance, in flake graphite cast irons the mechanical properties are low while the thermal conductivity is high. READ MORE
-
8. High Performance Manufacturing of Advanced Thin Plates ─ Forming of Titanium and Stainless Steel Materials
Abstract : The manufacturing industry represents a highly important sector of the Swedish economy. The increasing demands placed on the quality and performance of products that are manufactured places increasing demands on the manufacturing processes involved. READ MORE
-
9. Particulate Emissions Associated with Diesel Engine Oil Consumption
Abstract : Particulate emissions from diesel engines have been a key issue for diesel engine developers in recent decades. Their work has succeeded in reducing the exhaust particles from the combustion of fuel, which has led to increasing interest in the contribution of particulates from lubrication oil. READ MORE
-
10. Moisture-induced stress and distortion of wood : A numerical and experimental study of wood's drying and long-term behaviour
Abstract : With the current advances made in three-dimensional modelling of wood, it is possible to provide an overall picture of moisture flow, and moisture-induced stress and deformations, whereas previously, experiments only provided local measurements. The main aim of the doctoral thesis is to investigate the possibilities of the developed three-dimensional numerical model to predict the behaviour of wood when simultaneously exposed to a mechanical load and a particular climate. READ MORE