Search for dissertations about: "corrosion resistance"

Showing result 1 - 5 of 162 swedish dissertations containing the words corrosion resistance.

  1. 1. High temperature corrosion in a biomass-fired power boiler Reducing furnace wall corrosion in a waste wood-fired power plant with advanced steam data

    University dissertation from Stockholm : KTH Royal Institute of Technology

    Author : Yousef Alipour; KTH.; [2013]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High temperature corrosion; Waterwalls; Power plant corrosion; NOx reducing enviroments; Biomass; Waste wood; Thermodynamic calculation modelling; corrosion-resistance alloy; Furnace wall corrosion; Högtemperaturekorrosion; Eldstadsväggar; kraftverks korrosion; låg Nox mijöer; biomassa; returträ; Termodynamisk modellering; korrosionsbeständighet legering; eldstadskorrosion;

    Abstract : The use of waste (or recycled) wood as a fuel in heat and power stations is becoming more widespread in Sweden (and Europe), because it is CO2 neutral with a lower cost than forest fuel. However, it is a heterogeneous fuel with a high amount of chlorine, alkali and heavy metals which causes more corrosion than fossil fuels or forest fuel. READ MORE

  2. 2. Corrosion of Ferritic Stainless Steels Used in Solid Oxide Fuel Cells

    University dissertation from ; Chalmers tekniska högskola; Gothenburg

    Author : Claudia Goebel; [2018]
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Interconnect; Area Specific Resistance; Corrosion; Dual Atmosphere; SOFC;

    Abstract : Solid oxide fuel cells (SOFC) are energy conversion systems with clean emissions (depending on the fuel used) and high electrical efficiencies, which could potentially replace conventional conversion systems such as combustion engines. However, other issues, such as high costs and limited lifetime, must be resolved before widespread commercialization of SOFCs can be achieved. READ MORE

  3. 3. Magnetron Sputtering of Nanocomposite Carbide Coatings for Electrical Contacts

    University dissertation from Uppsala : Acta Universitatis Upsaliensis

    Author : Kristian Nygren; Uppsala universitet.; [2016]
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; transition metal carbide; amorphous carbon; composite; contact resistance; corrosion; friction; optical properties;

    Abstract : Today’s electronic society relies on the functionality of electrical contacts. To achieve good contact properties, surface coatings are normally applied. Such coatings should ideally fulfill a combination of different properties, like high electrical conductivity, high corrosion resistance, high wear resistance and low cost. READ MORE

  4. 4. The effect of microstructure and temperature on the atmospheric corrosion of Mg-Al alloys

    University dissertation from Uppsala : Acta Universitatis Upsaliensis

    Author : Mohsen Esmaily; [2013]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Atmospheric corrosion; microstructure; temperature; corrosion product; magnesium;

    Abstract : The NaCl-induced atmospheric corrosion behavior of the Mg-Al alloy AM50 produced by rheo-casting (RC) and high pressure die casting (HPDC) techniques was studied in the laboratory. The exposures were performed at 95% RH in the absence and presence of 400 ppm CO2 at 22, 4 and -4ºC. In parallel, 99.97%Mg was investigated as reference. READ MORE

  5. 5. The Role of Microstructure in the Atmospheric Corrosion of Selected Light Alloys and Composites

    University dissertation from Uppsala : Acta Universitatis Upsaliensis

    Author : Mohsen Esmaily; [2016]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; galvanic corrosion; Al content; microstructure; intermetallic particles; atmospheric corrosion; Al alloy 6xxx; casting; Mg-Al alloys; FSW P; BFSW.; Mg alloys-based MMCs;

    Abstract : Magnesium-aluminum (Mg-Al) alloys, Mg-based metal matrix composites (MMCs) and Al alloys are among the best material candidates for future lightweight solutions. However, the use of these materials is limited by a number of issues, including the ability to resist corrosion. READ MORE