Search for dissertations about: "current source inverter"
Showing result 1 - 5 of 8 swedish dissertations containing the words current source inverter.
-
1. Grid-Connected Voltage Source Converter - Control Principles and Wind Energy Applications
Abstract : The thesis focuses on a forced-commutated voltage source converter (VSC) connected to a grid in a wind energy application. The work consists of four parts. The first part addresses the type of electrical system which should be used in a wind turbine. READ MORE
-
2. Modelling and control of a line-commutated HVDC transmission system interacting with a VSC STATCOM
Abstract : The interaction of an HVDC converter with the connected power system is of complex nature. An accurate model of the converter is required to study these interactions. The use of analytical small-signal converter models provides useful insight and understanding of the interaction of the HVDC system and the connected system components. READ MORE
-
3. Robust Control of an Induction Motor Drive
Abstract : This thesis considers robust control of an induction motor drive, consisting of an input filter, a voltage source inverter and one or several induction motors in parallel. The motor torque is here controlled by using the method Indirect Self Control (ISC), and power oscillations between the inverter and the input filter are damped by means of a stabilization controller in an outer feedback loop. READ MORE
-
4. Harmonic Mitigation in Traction Drives
Abstract : In railway traffic the low friction between wheel and rail causes long braking distances, normally much longer than the sight distance of the driver, i.e. if the driver starts the braking when a problem on the track is discovered, it might be too late to brake the train. Therefore, safe railway traffic can not only rely on the driver. READ MORE
-
5. Power Control Systems for PM Synchronous Flywheel Alternators
Abstract : Flywheel systems are attractive in hybrid and electric vehicles, being able to handle the large power when accelerating and for regenerative braking. The combination of a flywheel device with a battery source has several advantages, such as higher peak power capacity, higher energy density and a decrease of the number of charging/discharging cycles in the battery. READ MORE