Search for dissertations about: "cutting conditions"
Showing result 1 - 5 of 128 swedish dissertations containing the words cutting conditions.
-
1. Workpiece steels protecting cutting tools from wear : A study of the effects of alloying elements on material transfer and coating damage mechanisms
Abstract : The vision of this thesis is to improve the machinability of workpiece steels. Workpiece material frequently transfers to the cutting tools during machining, and the transfer layers then forming on the tools may give both good and bad effects on machining performance and tool life. READ MORE
-
2. Mechanical Load Identification for Spontaneous Tool Failure Monitoring
Abstract : The problem of spontaneous cutting tool failure, such as tool chipping and breakage, is becoming more and more important in the manufacturing technology. The sponataneous tool failure is usually associated with the stresses subjected on the tool during a metal cutting process. READ MORE
-
3. FE-Simulation of Metal Cutting Processes
Abstract : Machining a new component or a new material requires the selection of the cutting conditions, the tool material and the tool geometry. The selections should be also optimized for the existing components and materials to improve the quality of the produced components and reduce the cost of production. READ MORE
-
4. FE-Simulation of Metal Cutting Processes
Abstract : This thesis deals with the finite element (FE) simulation of machining processes. Realistic simulation of metal cutting processes enables a more resource-efficient machinability assessment for a given material in terms of cutting forces, chip shape and tool wear at different ranges of cutting conditions. READ MORE
-
5. Characterization of White Layers induced by Hard Turning of AISI 52100 Steel
Abstract : Hard turning is a machining process applied to metallic materials with hardness above 45 HRC. The process offers high production flexibility and sustainable manufacturing since it allows performing both rough and finishing machining of complex geometries in one single setup. READ MORE