Search for dissertations about: "fatigue loading"
Showing result 1 - 5 of 181 swedish dissertations containing the words fatigue loading.
-
1. Direct Calculation of Wave-Induced Loads and Fatigue Damage of Container Vessels
Abstract : Container ships and their rules for fatigue design are in several ways differentcompared with other types of commercial ships such as tankers and bulk carriers. Forexample, most modern container ships have a pronounced bow flare and an overhangstern. READ MORE
-
2. Transverse cracking in cross-ply composites during static and fatigue loading at different temperatures
Abstract : Polymer composite laminates are preferred in many load bearing applications for its tailorable mechanical properties while offering light-weight solution, corrosive resistance etc. Hence, polymer composites are attractive material choice for aircraft manufacturers to reduce weight and emissions. READ MORE
-
3. Influences of temperature, fatigue and mixed mode loading on the cohesive properties of adhesive layers
Abstract : This thesis concerns some aspects that have influence on the strength of adhesive layers. The strength is determined by the stress deformation-relation of the layer. This relation is also referred to as cohesive law. READ MORE
-
4. Fatigue Assessment of Cast Components : Influence of Cast Defects
Abstract : This thesis is on the fatigue assessment of cast components with special attention to defects. The primary material in view is nodular cast iron, but also cast steel is considered. However, the fatigue behaviour is in principle valid for general use on other cast metals. READ MORE
-
5. Failure of thermal barrier coatings under thermal and mechanical fatigue loading : microstructural observations and modelling aspects
Abstract : Industrial and air-borne gas turbine hot components suffer from creep, oxidation, corrosion and microstructural degradation if not shielded from the hot and aggressive combustion gases. Two major strategies commercially available are adopted; film cooling by pressurised air and application of protective coatings. READ MORE