Search for dissertations about: "fib sem"

Showing result 1 - 5 of 46 swedish dissertations containing the words fib sem.

  2. 1. Microscopy of high temperature oxidation of iron and some stainless steels

    Author : Torbjörn Jonsson; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; water vapour; sulphur dioxide; FIB; X20; stainless steel; 353MA; EDX; KCl; FIB SEM; SEM; microstructure; TEM; iron; High-temperature oxidation; in-situ ESEM;

    Abstract : This thesis concerns the high temperature oxidation of iron and some stainless steels. The oxide scales, as well as the subjacent metal, were investigated using a range of electron and ion microscopy techniques, including SEM, TEM, EDX and FIB. The aim was to link the microstructural observations to the oxidation mechanisms of the materials. READ MORE

  4. 2. Microscopy investigation of the high temperature corrosion of iron and two stainless steels

    Author : Torbjörn Jonsson; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 353MA; EDX; X20; TEM; stainless steel; water vapour; iron; SEM; vaporisation; High-temperature oxidation; microstructure; FIB SEM.; sulphur dioxide; FIB;

    Abstract : .... READ MORE

  5. 3. The influence of Al alloy microstructure on conversion coating formation

    Author : Salil Sainis; Caterina Zanella; Ehsan Ghassemali; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aluminium alloys; cast Al-Si alloys; conversion coating treatment; cerium; localized deposition; surface pre-treatments; microstructure; SEM; FIB-SEM; AFM-SKPFM; aluminiumlegeringar; gjutna Al-Si legeringar; omvandlingsbeläggningar; cerium; lokaliserad deposition; ytförbehandlingar; microstruktur SEM; FIB-SEM; AFM-SKPFM;

    Abstract : The formation of conversion coatings based on Ce, trivalent Cr and Ti/Zr is triggered by the local pH increase at cathodic IM sites of the aluminium alloy microstructure. The pH gradient is created over the cathodic intermetallic (IM) sites of the microstructure and its intensity is influenced by their activity which depends on their chemical composition, their size, and spatial distribution. READ MORE

  6. 4. Atmospheric corrosion of Mg and MgAl alloys – characterization and mechanisms

    Author : Mehrdad Shahabi Navid; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EDX; CO2; XPS; Mg and MgAl alloys; NaCl; Atmospheric corrosion; Characterization; 3D imaging; SEM; BIB; Thin film; FTIR; XRD; Pitting; Interference microscopy; FIB;

    Abstract : The atmospheric corrosion of Mg and MgAl alloys was investigated. Corrosion tests were performed in the laboratory under controlled environment. CP Mg, AM50 and AZ91 samples were exposed at 95% RH and 22°C in the presence and in the absence of 400 ppm CO2 for 24 h to 672 h. The passive film was characterized by means of XPS, FTIR, AES and XRD. READ MORE

  7. 5. Mechanisms of Plastic Deformation of Cemented Carbide and Cermet Cutting Tools

    Author : Gustaf Östberg; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; SEM; cermets; TEM; plastic deformation; ab initio calculations; EFTEM; APFIM; FIB; cemented carbides; EBSD;

    Abstract : In this thesis, the physical mechanisms acting during plastic deformation of hardmetals used in metal cutting applications have been investigated. Microstructural and microanalytical studies have been performed on cemented carbides as well as cermet materials. READ MORE