Search for dissertations about: "finit"

Showing result 11 - 15 of 30 swedish dissertations containing the word finit.

  2. 11. Fire temperature development in enclosures : Some theoretical and experimental studies

    Author : Alexandra Byström; Björn Karlsson; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Abstract : This thesis is devoted to problems connected to heat transfer and fire dynamics in enclosures. The thesis consists of a main part which summarizes and discusses the theory of heat transfer, conservation of energy and fire dynamics. Based on these theories, some cases of different fire scenarios have been analyzed. READ MORE

  4. 12. Influence of inhomogeneities on the tensile and compressive mechanical properties of paperboard

    Author : Anton Hagman; Mikael Nygårds; Sören Östlund; Nils Hallbäck; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Paperboard; Inhomogeneities; In-plane properties; Tension; Compression; Shear properties; Delamination; Hållfasthetslära; Solid Mechanics;

    Abstract : The in-plane properties of paperboard have always been of interest to paper scientists. Tensile properties are crucial when the board is fed through converting machines at high speeds. Compressive properties are essential in the later use. Inhomogeneities affect both the compressive and tensile properties. READ MORE

  5. 13. Detecting Inclusions in a Silicone Rubber Phantom Using Standing Lamb Waves and Multiple Frequency Footprints

    Author : Ulf G Jonsson; Britt Andersson; Olof A Lindahl; Jacques Ohayon; Umeå universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Piezoelectric; Silicone rubber; Impedance; Resonance; Lamb waves; Phantom; Electronics; elektronik;

    Abstract : The thesis deals with one major question: is it possible, using one piezoelectric sensor/vibrator, to detect a hard inclusion in a silicone rubber phantom? The question was approached with an open mind and the task was subdivided into three clearly identifiable parts: characterization of the piezoelectric sensor/vibrator (paper I), creating a model of the visco-elastic properties of a tissue-like material (phantom) in contact with the sensor/vibrator (paper II), and to detect the presence of a hard inclusion in the phantom (paper III). All vibrations of the sensor/vibrator and phantom was modeled using a finite element method (FEM). READ MORE

  6. 14. Optimal Pin Fin Heat Exchanger Surface

    Author : Hamid Nabati; Jafar Mahmoudi; Mohsen Assadi; Mälardalens högskola; []
    Keywords : Pin Fin; CFD; Numerical Simulation; Power Transformer; TECHNOLOGY; TEKNIKVETENSKAP; Energy- and Environmental Engineering; energi- och miljöteknik;

    Abstract : This research presents the results of numerical study of heat transfer and pressure drop in a heat exchanger that is designed with different shape pin fins. The heat exchanger used for this research consists of a rectangular duct fitted with different shape pin fins, and is heated from the lower plate. READ MORE

  7. 15. On Electrical Machine Topologies for Electric Vehicle Applications

    Author : Konstantina Bitsi; Stefan Östlund; Sjoerd Bosga; Anouar Belahcen; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Abstract : The deployment of electric vehicles is considered a viable solution towardsreducing the global greenhouse-gas emissions and fossil-fuel consumption. Inorder to produce highly efficient and economically feasible electrical drivesystems, the selection of suitable electric motor designs is a key step. READ MORE