Search for dissertations about: "flexural strength"

Showing result 1 - 5 of 50 swedish dissertations containing the words flexural strength.

  2. 1. Fracture mechanics studies of non-yielding materials like concrete : modelling of tensile fracture and applied strength analyses

    Author : Per-Johan Gustafsson; Institutioner vid LTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; cracking; corners; test-specimens; strength; tension; fracture mechanics; strain localization; size-effect; flexural strength; LEFM; fictitious crack model; Weibull; FEM; pipes; shear strength; concrete; diagonal tension;

    Abstract : Fracture mechanics studies of non-yielding materials are presented. The studies are based on theoretical models for the macroscopical mechanical behaviour of materials during tensile stress induced fracture. A number of applied numercal analysis are indicated. READ MORE

  4. 2. Can Bone Void Fillers Carry Load? : Behaviour of Calcium Phosphate Cements Under Different Loading Scenarios

    Author : Ingrid Ajaxon; Cecilia Persson; Caroline Öhman-Mägi; Uwe Gbureck; Uppsala universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; MEDICAL AND HEALTH SCIENCES; MEDICIN OCH HÄLSOVETENSKAP; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; MEDICIN OCH HÄLSOVETENSKAP; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; MEDICAL AND HEALTH SCIENCES; Calcium phosphate; bone cement; brushite; apatite; monetite; porosity; solvent exchange; degradation; compressive strength; diametral tensile strength; flexural strength; elastic modulus; Poisson’s ratio; fatigue; Teknisk fysik med inriktning mot materialvetenskap; Engineering Science with specialization in Materials Science;

    Abstract : Calcium phosphate cements (CPCs) are used as bone void fillers and as complements to hardware in fracture fixation. The aim of this thesis was to investigate the possibilities and limitations of the CPCs’ mechanical properties, and find out if these ceramic bone cements can carry application-specific loads, alone or as part of a construct. READ MORE

  5. 3. Development and characterisation of bast and basalt fibre hybrid polymer composites for automotive applications

    Author : Anjum Saleem; Roberts Joffe; Högskolan i Borås; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flax; Hemp; Kenaf; Basalt fibres; Polypropylene; Acrylic based polyester resins; Flexural; Tensile; Impact strength; Resource Recovery; Resursåtervinning;

    Abstract : Natural fibres such as kenaf, hemp, and flax, also known as bast fibres, offer several benefits such as low density, low cost, carbon dioxide neutrality, sustainability and renewability. In Europe, their composites are used intensively by almost all car manufacturers, mostly in interior applications. READ MORE

  6. 4. Flexural Buckling of High-Strength Steel Columns

    Author : Gabriel Sabau; Ove Lagerqvist; Torsten Höglund; Luleå tekniska universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Stålbyggnad; Steel Structures;

    Abstract : The European standards dealing with design rules and recommendations for steel structures have been under revision in the past years due to the increased use of high-strength steels. High-strength steels popularity increased at a steady pace in the last decades since they allow for more light-weighted solutions than conventional steels. READ MORE

  7. 5. Mechanical and Microstructural Properties of Monolithic Zirconia

    Author : Keisuke Nakamura; Göteborgs universitet; Göteborgs universitet; Gothenburg University; []
    Keywords : MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; zirconia; flexural strength; microstructure; fracture resistance; monolithic crown; low-temperature degradation; phase transformation;

    Abstract : Zirconia has been widely used in dentistry to improve the strength of ceramic restorations maintaining aesthetics. In addition, zirconia is increasingly being used for monolithic crowns without veneering porcelain. READ MORE