Search for dissertations about: "flow rate"

Showing result 1 - 5 of 1120 swedish dissertations containing the words flow rate.

2. 1. Flow Measuring Techniques in Steady and Pulsating Compressible Flows

   Author : Fredrik Laurantzon; Henrik Alfredsson; Björn Lindgren; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flow measuring; compressible flow; steady flow; pulsating flow; hot-wire anemometry; cold-wire anemometry; Engineering mechanics; Teknisk mekanik;

   Abstract : This thesis deals with flow measuring techniques applied on steady and pulsatingflows. Specifically, it is focused on gas flows where density changes canbe significant, i.e. compressible flows. READ MORE

4. 2. Flow measurements related to gas exchange applications

   Author : Fredrik Laurantzon; Henrik Alfredsson; Venkatesa Vasanta Ram; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flow meters; vortex flow meters; compressible flow; pulsating flow; hot-wire anemometry; cold-wire anemometry; time resolved measurements; wavelet analysis;

   Abstract : This thesis deals with flow measuring techniques applied to steady and pulsating gas flows relevant to gas exchange systems for internal combustion engines. Gas flows in such environments are complex, i.e. they are inhomogeneous, three-dimensional, unsteady, non-isothermal and exhibit significant density changes. READ MORE

5. 3. Flow and Compression of Granulated Powders : The Accuracy of Discrete Element Simulations and Assessment of Tablet Microstructure

   Author : Ann-Sofie Persson; Göran Frenning; Göran Alderborn; Marie Wahlgren; Uppsala universitet; []
   Keywords : MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; Discrete Element Method; Granule; Flow; Angle of Repose; Discharge Rate; Shear; Rolling friction; Compression; Elastic deformation; Microstructure; Degree of compression; Tensile strength; Galenisk farmaci; Pharmaceutics;

   Abstract : Simulations are powerful and important tools for gaining insight into powder processes. Ultimately, simulations have the potential to replace experiments. Thus, accurate models and insight into the essential factors for descriptions of powder behaviour are required. READ MORE

6. 4. Investigations of Flow Patterns in Ventilated Rooms Using Particle Image Velocimetry : Applications in a Scaled Room with Rapidly Varying Inflow and over a Wall-Mounted Radiator

   Author : Amir Sattari; Ivo Martinac; Mats Sandberg; Dirk Müller; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Particle Image Velocimetry PIV ; experimental study; structured light 3D scanning system; ventilation; varying flow rate; room model; wall-mounted radiator; air; water; flow; Particle Image Velocimetry PIV ; experimentell studie; scanningsystem för strukturerat 3D-ljus; ventilation; varierande tilluftsflöde; rumsmodell; väggmonterad radiator; Engineering Mechanics; Teknisk mekanik; Byggvetenskap; Civil and Architectural Engineering; Energy Technology; Energiteknik;

   Abstract : This thesis introduces and describes a new experimental setup for examining the effects of pulsating inflow to a ventilated enclosure. The study aimed to test the hypothesis that a pulsating inflow has potential to improve ventilation quality by reducing the stagnation zones through enhanced mixing. READ MORE

7. 5. Fibre flow mechanisms

   Author : Roger Bergström; Ulf Björkman; Bo Norman; Mark Martinez; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fibre flow; floc; shear; compression; fibre network; stress chain; Cellulose and paper engineering; Cellulosa- och pappersteknik;

   Abstract : The flow behaviour, and primarily the floc-floc interaction, of pulp paper suspensions have been studied visually. Analogy models based on these observations have been developed as well as the identification of important parameters of floc break-up in low shear rate flow fields. READ MORE