Search for dissertations about: "flow reactors"
Showing result 1 - 5 of 103 swedish dissertations containing the words flow reactors.
-
1. Simulation of Chemical Reactors
Abstract : This thesis consists basically of two parts. They are, however, interrelated by the fact that both parts concerns modelling of catalytic reaction systems and also by the fact that in both parts, spectral methods are used for simulation. The first part describes the numerical treatment of the dispersion model. READ MORE
-
2. A Study of Using Pulsed Neutron Activation for Accurate Measurements of Water Flow in Pipes
Abstract : The objectives of this work were 1) to investigate the performance of the pulsed neutron activation (PNA) method for determination of mass flow of water in pipes, and 2) to improve the accuracy such that an error less than 1% become possible with the PNA method. The ultimate purpose is to develop this method into a high-accuracy portable and non-intrusive flow-meter that easily can be used as a calibration tool at a number of field applications, e. READ MORE
-
3. Vortices in turbulent curved pipe flow-rocking, rolling and pulsating motions
Abstract : This thesis is motivated by the necessity to understand the flow structure of turbulent flows in bends encountered in many technical applications such as heat exchangers, nuclear reactors and internal combustion engines. Flows in bends are characterised by strong secondary motions in terms of counter-rotating vortices (Dean cells) set up by a centrifugal instability. READ MORE
-
4. On the modelling of turbulent flow and mixing in stirred reactors
Abstract : This thesis concerns the numerical simulations and modelling of the flow structure and scalar transport in stirred reactors. For this Large Eddy Simulations (LES) have been used. The flow situation in a stirred reactor includes several flow phenomena that are not well predicted by "standard" two-equation models, e.g. READ MORE
-
5. Measurements of Film Flow Rate in Heated Tubes with Various Axial Power Distributions
Abstract : Measurements of film mass flow rate for annular, diabatic steam-water flow in tubes are presented. The measurements were carried out with four axial power distributions and at several axial positions at conditions typical for boiling water reactors, i.e. 7 MPa pressure and total mass flux in a range from 750 to 1750 kg/m2s. READ MORE