Search for dissertations about: "fuel injection system"
Showing result 6 - 10 of 70 swedish dissertations containing the words fuel injection system.
-
6. System Simulation of Partially Premixed Combustion in Heavy-Duty Engines : Gas Exchange, Fuels and In-cylinder Analysis
Abstract : The concept of partially premixed combustion (PPC), applied to conventional diesel engines, has shown to yield high gross efficiencies and low emissions of oxides of nitrogen and soot. PPC emerged from the knowledge gained from homogeneous charge compression ignition (HCCI) research. READ MORE
-
7. Investigating Effects of Water Injection on SI Engines
Abstract : In recent years, there has been a major shift towards the partial or complete electrification of vehicles that have traditionally been powered by conventional internal combustion (IC) engines; almost all major automotive manufacturers have rightly stated that they will make such a shift. This has been motivated in large part by pressure from governments and policymakers to minimize vehicular emissions, especially those of the greenhouse gas CO2, in order to control climate change. READ MORE
-
8. CFD Modeling of an Alcohol-Diesel Direct-Injection Dual-Liquid-Fuel Engine using OpenFOAM
Abstract : Legislation for heavy duty combustion engines are becoming more stringent. To keep up with the legislation, new engine technology is required. Furthermore, renewable fuels can also be used together with new engine technology to further reduce emissions. READ MORE
-
9. DME and the Heavy Duty Diesel Engine
Abstract : Increasing awareness of adverse anthropogenic environmental effects, such as the effectsof combusting fossil fuels on atmospheric carbon dioxide concentrations, and thatcombustion-related emissions from the transportation sector are going to approachsustainable levels in the near future has led to increased interest in fuels from renewablesources. These fuels offer possibilities to diversify the feedstocks that can be used forfuel production, as well as to reduce fossil carbon dioxide emissions, thereby reducingour dependence on a very limited range of sources. READ MORE
-
10. Experimental and Modeling Studies of Sulfur-Based Reactions in Oxy-Fuel Combustion
Abstract : Oxy-fuel combustion is a technology for CO2 capture that is suitable for large-scale, coal-fired power plants. In this system, the combustion air is replaced by a mixture of O2 and recycled flue gases, so as to enrich for CO2 in the flue gas. READ MORE