Search for dissertations about: "graphitisation"
Found 5 swedish dissertations containing the word graphitisation.
-
1. Experimental Studies of Thermal Diffusivities concerning some Industrially Important Systems
Abstract : The main objective of this industrially important work was to gain an increasing understanding of the properties of some industrially important materials such as CMSX-4 nickel base super alloy, 90Ti.6Al.4V alloy, 25Cr:6Ni stainless steel, 0. READ MORE
-
2. Property measurements towards understanding process phenomena
Abstract : The main objective of this industrially important work was to gain an increasing understanding of the properties of materials such as CMSX-4 nickel base super alloy, mould powder used in continuous casting of steel and coke used in blast furnace, with special reference to the thermal diffusivities. The measurements were carried out in a wide temperature range, solid, liquid, glassy and crystalline states. READ MORE
-
3. Evolution of coke properties while descending through a blast furnace
Abstract : Due to increasing price and economic pressures, there is a need to minimise coke consumption. The lesser amount of coke used has indirectly set higher standards for coke quality and led to a wish for even more knowledge about its function in the blast furnace. READ MORE
-
4. Development of coke properties during the descent in the blast furnace
Abstract : The efficiency in use of reducing agents in blast furnace (BF) ironmaking has been significantly improved over the years. At most blast furnaces, auxiliary fuels are injected to replace some of the coke. To further reduce carbon consumption, prevention of losses and modification of raw materials or process conditions are required. READ MORE
-
5. Contacts on Silicon Carbide by Use of Nickel and Tantalum ---Preparation and Characterisation
Abstract : Silicon carbide (SiC) is one of the attractive semiconductors due to its good electrical, thermal and mechanical properties. It is a promising material for high temperature, high power and high frequency application. Reliable electrodes are always necessary to utilise SiC for electronic devices. READ MORE