Search for dissertations about: "grey casting"

Showing result 1 - 5 of 10 swedish dissertations containing the words grey casting.

  2. 1. Metal Expansion Penetration During Solidification of Grey Cast Iron

    Author : Izudin Dugic; Linköpings universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grey cast iron; solidification; solidification modelling; graphite expansion; molar volume; casting simulation; thennal analysis; thermoanalysis cup; casting temperature; inoculation; inoculant; meta! expansion penetration; eutectic cell size.; TECHNOLOGY; TEKNIKVETENSKAP;

    Abstract : The meta! expansion penetration has been examined experimentally. The whole casting process was simulated using a commercial software, in order to investigate the solidification characteristics and the pore formation in the casting studied. READ MORE

  4. 2. The mechanisms of metal expansion penetration during solidification of grey cast iron

    Author : Izudin Dugic; Preben Norgaard Hansén; Linköpings universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grey cast iron; solidification; solidification modelling; graphite expansion; molar volume; casting simulation; thermal analysis; thermoanalysis cup; casting temperature; inoculation; inoculant; metal expansion penetration; eutectic cell size; primary austenite; austenite grain; TECHNOLOGY; TEKNIKVETENSKAP;

    Abstract : The production of high quality castings requires the casting surface to be clean and free from defects. One type of defect often found is caused by metal penetration into the sand mould. READ MORE

  5. 3. Defect Formation during Solidification in Grey Iron Castings

    Author : Lennart Elmquist; Ingvar Svensson; Attila Diószegi; Doru Stefanescu; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Shrinkage Porosity; Grey Iron; Solidification; Nucleation; Primary Austenite; DAAS; Eutectic Cells; Microstructure; Macrostructure; Hot Spot; Oxygen; Hydrogen; Materials science; Teknisk materialvetenskap;

    Abstract : The presence of defects is of major concern in the production of grey iron castings. Some defects are merely an aesthetic problem while others can be detrimental for the performance of the component. Among the several possible defects, shrinkage porosity is one of the more challenging to understand and avoid. READ MORE

  6. 4. On microstructure formation and mechanical properties in grey cast iron

    Author : Attila Diószegi; Preben N. Hansén; Linköpings universitet; []
    Keywords : grey iron; nucleation; primary austenite; eutectic cell; growth rate; inoculation; thermal analysis; TECHNOLOGY; TEKNIKVETENSKAP;

    Abstract : A major user of cast components is the automotive industry, where the functionality of the components is related to environmental demands. Internal combustion engines are constantly being improved to emit less pollution. A vital part in this development is to increase the material properties of engine components during their life cycle. READ MORE

  7. 5. Factors Influencing the Formation of Shrinkage Porosity in Grey Cast Iron

    Author : Lennart Elmquist; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CET; Oxygen; Columnar zone; Grey iron; Shrinkage porosity; Equiaxed zone; Solidification; DAAS; Hydrogen; Primary austenite;

    Abstract : The presence of shrinkage defects is of major concern in the production of grey iron castings. This type of defect can penetrate through the casting as a three-dimensional network. READ MORE