Search for dissertations about: "grinding wheels"
Showing result 1 - 5 of 9 swedish dissertations containing the words grinding wheels.
-
1. Development of Multi-grit cBN Grinding Wheel for Crankshaft Grinding
Abstract : Crankshaft is a geometrically challenging component to grind. Over the years a number of grinding strategies have been developed to overcome thermal damage issues and excessive wheel wear. Radial and angular plunge processes have been adopted on some of the production machines. Recently a new, temperature-based strategy, has been proposed. READ MORE
-
2. Development of Multi-grit cBN Grinding Wheel for Crankshaft Grinding
Abstract : A crankpin, part of a crankshaft, has a complex profile that is difficult to grind. The process often causes challenges such as excessive heat on the crankpin sidewall and wheel wear on the radius, causing reduced dressing interval. Different solutions were proposed to overcome these challenges, mainly focusing on the process, i.e. READ MORE
-
3. Rail grinding and its impact on the wear of wheels and rails
Abstract : Rail grinding has been employed since the 1980s in maintaining optimal rail profile as well as in the elimination of surface defects such as corrugations and head-checks. Likewise, the wheel sets also require re- turning to remove surface defects and restore the desired profile. READ MORE
-
4. Modeling and Requirements of the Automated Deburring Process
Abstract : An increasing number of robots have been used for the finishing of castings during recent years. This is mainly due to developments to overcome problems that restricted their use during the past decade. READ MORE
-
5. Simulation and Measurement of Wheel on Rail Fatigue and Wear
Abstract : The life of railway wheels and rails has been decreasing in recent years. This is mainly caused by more traffic and running at higher vehicle speed. READ MORE