Search for dissertations about: "heat of solution"

Showing result 1 - 5 of 303 swedish dissertations containing the words heat of solution.

  2. 1. Advances in Ventilation Heat Recovery : An assessment of peak loads shaving using renewables

    Author : Behrouz Nourozi; Sasan Sadrizadeh; Adnan Ploskic; Carey Simonson; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Peak heat load shaving; renewable energy; ventilation heat recovery; frosting in heat exchangers; Heat transfer; förnybar energi; ventilation värmeåtervinning; frosting i värmeväxlare; värmeöverföring; Byggvetenskap; Civil and Architectural Engineering;

    Abstract : The building sector accounts for approximately 40% of total global energy usage.In residential buildings located in cold climate countries, 30-60% of this energy isused for space heating, 20–30% is lost by discarded residential wastewater, and therest is devoted to ventilation heat loss. READ MORE

  4. 2. Heat treatment of Al-Si-Cu-Mg casting alloys

    Author : Emma Sjölander; Salem Seifeddine; Ingvar Svensson; Sten Johansson; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cast aluminium alloys; Heat treatment; Solution treatment; Artificial ageing; Tensile properties; Plastic deformation; Microstructure; Modelling;

    Abstract : Environmental savings can be made by increasing the use of aluminium alloys in the automotive industry as the vehicles can be made lighter. Increasing the knowledge about the heat treatment process is one task in the direction towards this goal. The aim of this work is to investigate and model the heat treatment process for Al-Si casting alloys. READ MORE

  5. 3. On Heat and Paper : From Hot Pressing to Impulse Technology

    Author : Marco Francesco Carlo Lucisano; KTH; []
    Keywords : Paper; Impulse Drying; Heat Transfer; Phase Change; Heat-Pipe Effect; Delamination; Flashing;

    Abstract : Impulse technology is a process in which water is removedfrom a wet paper web by the combined action of mechanicalpressure and intense heat. This results in increased dewateringrates, increased smoothness on the roll side of the sheet, andincreased density. READ MORE

  6. 4. Thermal modelling and evaluation of borehole heat transfer

    Author : Saqib Javed; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ground source heat pump; fluid temperature; borehole; short-term; thermal response test; groundwater-filled; optimization; load aggregation; simulation; recovery; step-response; long-term; ground heat exchanger; times; design; ground-coupled;

    Abstract : The use of ground source heat pump systems to provide heating and cooling inbuildings has increased greatly in the last decade or so. These systems have a highpotential for energy efficiency, which has environmental and economicadvantages. READ MORE

  7. 5. Combustion of agricultural residues : Application for Stirling micro-combined heat and power

    Author : Evelyn Cardozo; Torsten Torsten Fransson; Carlos Augusto Santos Silva; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Energiteknik; Energy Technology;

    Abstract : Access to energy services is crucial for the development of countries. Therefore, in developing countries, the access to modern conversion technologies would contribute to reduce the poverty, improve health services and promote the economy especially in rural areas. Around 2.5 billion people in these countries use biomass for cooking. READ MORE