Search for dissertations about: "high strength steels"

Showing result 1 - 5 of 93 swedish dissertations containing the words high strength steels.

  1. 1. High strength steel local buckling and residual stresses

    University dissertation from Luleå : Luleå tekniska universitet

    Author : Mattias Clarin; [2004]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Abstract : High strength steel provide designers with the possibility of creating more slender and weight efficient structures than would be possible if using steels with lower strength. To be able to do this, a structural designer needs updated and validated codes as aid in their work. READ MORE

  2. 2. Galling of high strength steels and stainless steels in sheet metal forming as evaluated using pin-on-disc testing

    University dissertation from Uppsala : Uppsala universitet

    Author : Jenny Eriksson; Uppsala universitet.; [2012]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Galling; sheet metal forming; high strength steels; stainless steels; Teknisk fysik med inriktning mot tribomaterial; Engineering Science with specialization in Tribo Materials;

    Abstract : The thesis focuses on the problem galling in sheet metal forming operations. Galling occurs when sheet metal transfers from the sheet surface onto the tool surface and causes surface damages to following sheets in the forming operation. When this happens the tool must be replaced causing production stops and additional expenses. READ MORE

  3. 3. Very high cycle fatigue of high performance steels

    University dissertation from Karlstad : Karlstad University

    Author : Vitaliy Kazymyrovych; Karlstads universitet.; [2008]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materialteknik; Materials Engineering; fatigue; tool steels; ultrasonic testing; fatigue life; crack growth rate; fatigue mechanisms;

    Abstract : Many engineering components reach a finite fatigue life well above 109 load cycles. Some examples of such components are found in airplanes, automobiles or high speed trains. For some materials the fatigue failures have lately been found to occur well after 107 load cycles, namely in the Very High Cycle Fatigue (VHCF) range. READ MORE

  4. 4. Martensitic Transformations in Steels A 3D Phase-field Study

    University dissertation from Stockholm : KTH Royal Institute of Technology

    Author : Hemantha Kumar Yeddu; KTH.; [2012]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Phase-field method; Martensitic transformations; Plastic de formation; Multi-length scale modeling; Microstructure; Stress states; Steels;

    Abstract : Martensite is considered to be the backbone of the high strength of many commercial steels. Martensite is formed by a rapid diffusionless phase transformation, which has been the subject of extensive research studies for more than a century. READ MORE

  5. 5. Improving fatigue properties of welded high strength steels

    University dissertation from Trollhättan : University West

    Author : Ebrahim Harati; Högskolan Väst.; [2017]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fatigue strength; Residual stress; Welds; Weld toe geometry; High strength steel; High frequency mechanical impact treatment; Low Transformation Temperature welding consumable; Manufacturing and materials engineering; Produktions- och materialteknik; Production Technology; Produktionsteknik;

    Abstract : In recent years a strong interest has been expressed to produce lighter structures.One possible solution to reduce the weight is to utilize high strength steels and use welding as the joining method. READ MORE