Search for dissertations about: "hydraulic field test"
Showing result 1 - 5 of 36 swedish dissertations containing the words hydraulic field test.
-
1. Stabilization of fine-grained soils in cold environment and exposed to seasonal frost : By-products as hydraulic binders
Abstract : This doctoral thesis deals with the stabilization of fine-grained soils using by-product originated hydraulic binders. The use of fine-grained soils as subsoil for infrastructure projects is often limited because of the risk for instability. READ MORE
-
2. Grouting of Hard Rock with Gelling Liquids, Field and Laboratory Studies of Silica sol
Abstract : Recent grouting projects in Sweden have concentrated on the grout itself. The only grout normally used in Sweden is a cement-based one. During the past 10 years, the acceptable flow of water into tunnels has been significantly reduced. The current requirements mean that an average fracture aperture of around 0. READ MORE
-
3. Hydraulic Conductivity of Saturated Sand-Bentonite mixtures
Abstract : The implementation of the EC directive concerning landfill liners and covers sets stricter technical and environmental requirements for landfill barriers. It is therefore essential to identify suitable materials that fulfil these requirements. READ MORE
-
4. Thermal response test : method development and evaluation
Abstract : Since the first introduction of thermal response tests with mobile measurement devices in Sweden and USA in 1995, the method has developed and spread in North America and Europe. Thermal response tests have so far been used primarily for in situ determination of design data for BHE (borehole heat exchanger) systems, but also for evaluation of grout material, heat exchanger types and groundwater effects. READ MORE
-
5. Numerical and experimental study of performance of a hydraulic motor
Abstract : The aim of this study was to develop an understanding of the fluid properties that influence the efficiency of hydraulic systems in a steady-state, especially components in hydrostatic transmission systems under different running conditions. The aim has also been to investigate and model the sources of losses in hydraulic machines, in order to estimate the losses, taking fluid properties into account. READ MORE