Search for dissertations about: "in situ SEM"

Showing result 1 - 5 of 69 swedish dissertations containing the words in situ SEM.

  1. 1. Mechanical behaviour of carbon nanostructures

    University dissertation from Karlstad : Karlstads universitet

    Author : Henrik Jackman; Karlstads universitet.; [2014]
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; carbon nanotubes; CNT; multiwalled carbon nanotubes; MWCNT; rippling; buckling; mechanical properties; transmission electron microscopy; TEM; scanning electron microscopy; SEM; atomic force microscopy; AFM; Young’s modulus; in situ TEM; in situ SEM; Physics; Fysik;

    Abstract : AbstractCarbon nanotubes (CNTs) have extraordinary mechanical and electrical properties. Together with their small dimensions and low density, they are attractive candidates for building blocks in future nanoelectromechanical systems and for many other applications. READ MORE

  2. 2. Microstructure of Zirconium Alloys Oxidized in Steam

    University dissertation from Karlstad : Karlstads universitet

    Author : Pia Tejland; [2009]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EDX; ADF; TEM; Zircaloy-2; FIB-SEM; STEM; GD-OES; SPP; SEM; Zirconium; HAADF;

    Abstract : Zirconium alloys are widely used in nuclear reactors as fuel cladding tubes because of their low thermal neutron capture cross-section, good corrosion properties and satisfactory mechanical properties. However, the main limiting factor of these materials is the oxidation behavior. READ MORE

  3. 3. Microscopy of high temperature oxidation of iron and some stainless steels

    University dissertation from Karlstad : Karlstads universitet

    Author : Torbjörn Jonsson; [2007]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; water vapour; sulphur dioxide; FIB; X20; stainless steel; 353MA; EDX; KCl; FIB SEM; SEM; microstructure; TEM; iron; High-temperature oxidation; in-situ ESEM;

    Abstract : This thesis concerns the high temperature oxidation of iron and some stainless steels. The oxide scales, as well as the subjacent metal, were investigated using a range of electron and ion microscopy techniques, including SEM, TEM, EDX and FIB. The aim was to link the microstructural observations to the oxidation mechanisms of the materials. READ MORE

  4. 4. Microsensors for in situ electron microscopy applications

    University dissertation from Karlstad : Karlstads universitet

    Author : Alexandra Nafari; [2010]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; capacitive read-out; Microsensors; In situ TEM; TEM-AFM; TEM-Nanoindenter; AFM; nanoscale characterisation; MEMS; Nanoindentation; piezoresistive read-out;

    Abstract : With the ongoing miniaturisation of devices, the interest in characterising nanoscale physical properties has strongly increased. To further advance the field of nanotechnology new scientific tools are required. READ MORE

  5. 5. Fundamental in-situ and ex-situ studies of energy storage related materials including different applications of voltammetry

    University dissertation from Stockholm : Stockholm University

    Author : Ulrik Palmqvist; Stockholms universitet.; [2001]
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; Ni-Cd pocket plate batteries; b-Ni OH 2; b-NiOOH; failures; goethite; surface complexation; Pb II ; Zn II ; Cu II ; Cd II ; in-situ; carbon; nanostructured; voltammetry; X-ray diffraction; electrical test; potentiometry; TEM; chlorination; oorganisk kemi; Inorganic Chemistry;

    Abstract : This thesis is a summary and discussion of eight papers dealing with failures and structural aspects of Ni-Cd industrial pocket plate batteries, applications of voltammetry in adsorption studies on goethite (a-FeOOH) surfaces and synthesis and characterisation of nanostructured carbons. The work consists of different areas of chemistry; electrochemistry, structural chemistry and solution chemistry. READ MORE