Search for dissertations about: "inclusions refining"
Showing result 1 - 5 of 13 swedish dissertations containing the words inclusions refining.
-
1. Growth and removal of inclusions during ladle refining
Abstract : The overall purpose of this thesis work has been to further our understanding of the growth and removal of inclusions in gas- and induction-stirred ladles. The primary focus has been on alumina inclusions.Growth mechanisms were studied using data from fundamental mathematical models of gas- and induction-stirred ladles. READ MORE
-
2. Inclusions and/or Particles Engineering for Grain Refining Purposes in Ferritic Fe-20mass%Cr alloys
Abstract : Compared to more common used austenitic stainless steels, ferritic stainless steels contain very low amounts of the expensive alloying element Ni. In addition, they have good corrosion properties, but are sometimes suffering from poor weldability and bad mechanical properties. READ MORE
-
3. Growth and Removal of Inclusions During Ladle Stirring
Abstract : The growth and removal of inclusions in stirred ladles hasbeen studied. First, the importance of different growthmechanisms suggested in the literature were studied. Simulationresults from a fundamental model of an induction-stirred ladlehave been used as input in the calculations. READ MORE
-
4. A study of slag-steel-inclusion interaction during Ladle treatment
Abstract : The thesis is based on two supplements with two major objectives. In the first supplement equilibrium top slag-steel bulk and inclusions-steel bulk were investigated by comparison between calculated and measured oxygen activity values. This was done by applying different oxide activity models for slags combined with thermodynamic calculations. READ MORE
-
5. Some aspects of non-metallic inclusions during vacuum degassing in ladle treatment : with emphasize on liquid CaO-Al2O3 inclusions
Abstract : The present thesis was to study non-metallic inclusions during vacuum degassing in ladle treatment. Emphasize was mostly given to liquid CaO-Al2O3 inclusions. A series of industrial experiments were carried out at Uddeholm Tooling AB, Hagfors, Sweden. To gain an insight into the industrial findings, laboratory investigations were also performed. READ MORE